Can someone with PET....
12-05-2007, 12:29 PM
#17
Banned
Join Date: Dec 2007
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
The problem with the PET from the Porsche site is it is over 1 year old already. It doesn't have the part cross refrence functions, search capabilities, or more. It doesn't even show the internals of the 996 six speed transmission. Get the real version.
12-05-2007, 01:01 PM
#18
I prefer the acrobat files on the Porsche site. I can use the google search to find crossreferences, or search by partial part numbers, and email a copy of one page to my parts guy so there is no question about what I want.
In addition, the old PET program had size limitations and would not run on a Mac.
As far as being over a year old, the PET executable is older than that anyway. I doubt that Porsche is going to let me on PIWIS to find what I need there.
In addition, the old PET program had size limitations and would not run on a Mac.
As far as being over a year old, the PET executable is older than that anyway. I doubt that Porsche is going to let me on PIWIS to find what I need there.
12-05-2007, 02:08 PM
#19
Banned
Join Date: Dec 2007
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Wrong on all counts. You can't enter old part numbers in the google seach on the PDF PET. PET 7.0 has no size limitations. One doesn't need to run 1280x1064 anymore. And I have PET executable that runs up thru the 2008 models.
12-05-2007, 03:59 PM
#20
Burning Brakes
Join Date: May 2006
Location: Off the Autobahn.
Posts: 777
Likes: 0
Received 0 Likes
on
0 Posts
12-05-2007, 04:16 PM
#21
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
So what's this going to cost me?
12-05-2007, 09:12 PM
#25
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
he ONLY wants 100 freaking bucks for it! SERIOUSLY. This piece of crap is a soliciting troll. He's emailed me without invitation TWICE! Go back to the top of this board and read the rules troll. Report sent.
Well that explains why he resurrected the thread since Michelle's last post on 09-13-2007.
12-05-2007, 11:27 PM
#28
Rennlist Member
I just did this. Depending on the nuts you use, 35mm might work. The exhaust hardware kit sold here a while back had 35mm bolts, but I found them to be a bit short to get full thread engagement with copper lock nuts. The 40mm bolts can some very close to the downpipe flange, so I ended up grinding a few mm's off the end of 40mm bolts....
12-07-2007, 02:56 PM
#30
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
A link to an on-line PET has been up in the Forum Guidelines thread for awhile now:
https://rennlist.com/forums/944-turbo-and-turbo-s-forum/343156-forum-guidelines-please-read-before-posting.html
https://rennlist.com/forums/944-turbo-and-turbo-s-forum/343156-forum-guidelines-please-read-before-posting.html