Blowing white smoke and misfiring
#32
Drifting
Thread Starter
Originally Posted by hosrom_951
I know Ian would be closer to you, but LR sells the wide fire gasket set (complete) for ~$150
#33
I have bought lot of parts from Ian, some parts may be little more expensive, some are cheaper than others. I like to support my local 944 store, he's a super nice guy and has just about everything in stock.
#34
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Originally Posted by LFA951
I have a shimmed wastegate, LR pipe with Autothority MAF with chips, a 3 bar fpr, 3" exhaust, no cat with Borla Muffler, Turbonetics MBC, Wide Fire HG with K/26-8....951Max chips on the way for my Autothority MAF with 30C calibration....
#35
Drifting
Thread Starter
Originally Posted by tman
I have bought lot of parts from Ian, some parts may be little more expensive, some are cheaper than others. I like to support my local 944 store, he's a super nice guy and has just about everything in stock.
#36
Drifting
Thread Starter
Originally Posted by lart951
so how did you adjust your fuel ratio?
#37
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Originally Posted by LFA951
Well, I had it dynoed and then I had the a/f checked by sticking a tube in the exhaust to a computer like they did for emissions...
#39
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Originally Posted by hosrom_951
Luis,
Don't authority chips run outrageously rich instead of lean?
Don't authority chips run outrageously rich instead of lean?
rich in the mid range and lean in the top, ask me how I know. I blown my first hg smoking the hell out of a 02 e46 M3 at 140mph .
#42
Drifting
Thread Starter
Originally Posted by lart951
rich in the mid range and lean in the top, ask me how I know. I blown my first hg smoking the hell out of a 02 e46 M3 at 140mph .
#43
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Originally Posted by LFA951
Yea, mine are rich up until 3,500rpm, then it goes lean according to the Dyno sheet, so there are some 951Max chips on way for my 30C MAF. I am taking my car to a reputable shop in Ft. Lauderdale Wednesday. He said 8 hours labor for the HG and exhaust manifold studs, so it'll be under $1,000 with parts...
#45
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Originally Posted by lart951
rich in the mid range and lean in the top, ask me how I know. I blown my first hg smoking the hell out of a 02 e46 M3 at 140mph .