Picture Post - 7 Lakes drive - Post headgasket replacement
#16
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Thanks for the replies.
5speed300 - I used a vacume diagram that was part of a word document posted up here that step by steped the whole vacume line replacement procedure.
reno808 - sounds like a plan to me, ill send you a private message or try you on aim.
5speed300 - I used a vacume diagram that was part of a word document posted up here that step by steped the whole vacume line replacement procedure.
reno808 - sounds like a plan to me, ill send you a private message or try you on aim.
#17
Three Wheelin'
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Nice car! Careful up there though, there are no guard rails...
Its definately a nice drive though, although I havent had time to go since October.
Did someone say meet at 7 lakes?
Its definately a nice drive though, although I havent had time to go since October.
Did someone say meet at 7 lakes?
#19
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
lee101315 - Where are you located? We could def. do the three of us up at 7 lakes one day.
Bill - This is the third 944 engine that I have done engine paint on. Prep is the most improtant part. Take your time and prep it correctly. I used gunk degreaser, then I sanded the parts down with a black and decker mouse till all grease was removed. If there is grease or oil on any parts, the paint wont stick and it will look like ****. I primered the parts too before painting them. It holds up well, good luck if you plan to do it.
Bill - This is the third 944 engine that I have done engine paint on. Prep is the most improtant part. Take your time and prep it correctly. I used gunk degreaser, then I sanded the parts down with a black and decker mouse till all grease was removed. If there is grease or oil on any parts, the paint wont stick and it will look like ****. I primered the parts too before painting them. It holds up well, good luck if you plan to do it.
#20
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Jeff my aim name is blake808 you can call me my number is 845-659-3629
Did you put a momo steering wheel on your 87? The thing is i am about to do that and i dont know which way i should get rid of the light (airbag). There are a couple of ways. I am wondering which u went with.
Did you put a momo steering wheel on your 87? The thing is i am about to do that and i dont know which way i should get rid of the light (airbag). There are a couple of ways. I am wondering which u went with.
#22
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Originally Posted by jmporsche944
Bill - This is the third 944 engine that I have done engine paint on. Prep is the most improtant part. Take your time and prep it correctly. I used gunk degreaser, then I sanded the parts down with a black and decker mouse till all grease was removed. If there is grease or oil on any parts, the paint wont stick and it will look like ****. I primered the parts too before painting them. It holds up well, good luck if you plan to do it.
Oh, looking at the pics again, is your fuel rail painted as well?
#24
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
reno - sounds good, whats your name so i can stop calling you by your sn?
bill - Nope no baking at all. You just prep it, spray a few coats on and thats it. I polished the letters after painting the cam housing. This is easier then polishing, then masking them off, then painting. The fuel rail is painted, good eyes!
bill - Nope no baking at all. You just prep it, spray a few coats on and thats it. I polished the letters after painting the cam housing. This is easier then polishing, then masking them off, then painting. The fuel rail is painted, good eyes!
#25
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Originally Posted by jmporsche944
reno - sounds good, whats your name so i can stop calling you by your sn?
bill - Nope no baking at all. You just prep it, spray a few coats on and thats it. I polished the letters after painting the cam housing. This is easier then polishing, then masking them off, then painting. The fuel rail is painted, good eyes!
bill - Nope no baking at all. You just prep it, spray a few coats on and thats it. I polished the letters after painting the cam housing. This is easier then polishing, then masking them off, then painting. The fuel rail is painted, good eyes!
![ooops](https://rennlist.com/forums/graemlins/icon501.gif)
#27
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Originally Posted by Sweet 944
Guys, let me know if you are going to get together in Harriman State Park.
I live in Monroe.. about 5 miles from those pictures.....
I live in Monroe.. about 5 miles from those pictures.....
#28
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Im thinking about starting a thread to organize this a little better, because theres a few people interested in this. Keep an eye out for it.