Notices
944 Turbo and Turbo-S Forum 1982-1991
Sponsored by:
Sponsored by: Clore Automotive

Toasted injectors - why?

Thread Tools
 
Search this Thread
 
Old 05-09-2007, 05:47 PM
  #31  
sweanders
Race Director
Thread Starter
 
sweanders's Avatar
 
Join Date: Jun 2002
Location: Sweden
Posts: 11,252
Likes: 0
Received 2 Likes on 2 Posts
Default

Originally Posted by MPD47
Anders, I had a similar problem when my wiring harness was junk. Cut back the boots on a few of the injector connectors and see if they are shorting out. I burned up one set of injectors and couldnt the car running correctly and that was found to be the culprit.
Thank you for posting this, I have been toying with the idea that the injector harness is shot. Unfortunately the car will have to sit until I have time to fix it.
Old 05-09-2007, 07:00 PM
  #32  
TT
Racer
 
TT's Avatar
 
Join Date: Jun 2001
Location: Huntingtown, MD
Posts: 363
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by sweanders
Thank you for posting this, I have been toying with the idea that the injector harness is shot. Unfortunately the car will have to sit until I have time to fix it.
If the injector wiring is shorted together at the injector connector it will only bypass the injector, killing fuel to that cylinder. It would have to short to ground on the DME side to fry the injector.



Quick Reply: Toasted injectors - why?



All times are GMT -3. The time now is 06:30 PM.