Stock 951 tranny abilities
#46
Drive-by provocation guy
Rennlist Member
Rennlist Member
Join Date: Apr 2002
Location: NAS PAX River, by way of Orlando
Posts: 10,439
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by special tool
Todd - do you REALLY keep your foot flat and do a complete gearchange with no electronic device to retard or cut ignition or fuel?
Running full throttle, engage clutch and then shift has been a process most cars have been able to handle, not run like that all day long, for the better part of 50 years.
#47
Drive-by provocation guy
Rennlist Member
Rennlist Member
Join Date: Apr 2002
Location: NAS PAX River, by way of Orlando
Posts: 10,439
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by RolexNJ
What are you my mother or my Crew Chief? Dude, stick to posting and not worrying about my driving skills, or when I am testing cars too. Maybe I'll come and smack you if I test @ Sebring.
Tool: He doesn't have an electronic device. Just call him "retard" for short.
Tool: He doesn't have an electronic device. Just call him "retard" for short.
And in NJ I know people are used to running off at the mouth at each other because they know nothing will happen; but in the south, we are more than happy to slap the smart right out of that pickle sucker of yours.
#48
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Originally Posted by toddk911
I don't worry about you or your 10 year project car. And in NJ I know people are used to running off at the mouth at each other because they know nothing will happen; but in the south, we are more than happy to slap the smart right out of that pickle sucker of yours.
#49
Drive-by provocation guy
Rennlist Member
Rennlist Member
Join Date: Apr 2002
Location: NAS PAX River, by way of Orlando
Posts: 10,439
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by special tool
So - Todd has "onboard" retard?
#50
Drive-by provocation guy
Rennlist Member
Rennlist Member
Join Date: Apr 2002
Location: NAS PAX River, by way of Orlando
Posts: 10,439
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by RolexNJ
That's nice. Have a nice day.
So next time you pull your tampon out and think your a tough guy, think again.
#51
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Originally Posted by toddk911
Yea, it is nice because there was no need for you to personally attack me. So next time you pull your tampon out and think your a tough guy, think again.
#53
If you plan on sawzalling your car up you better get busy. These transmissions will NOT take WOT shifts. Nor will they take launching, or burnouts. Unless you plan on buying a new trans. Like I've said 10x before, trust me, I know.
#54
Rennlist Member
Join Date: May 2005
Location: Buffalo, NY
Posts: 2,085
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by MPD47
If you plan on sawzalling your car up you better get busy. These transmissions will NOT take WOT shifts. Nor will they take launching, or burnouts. Unless you plan on buying a new trans. Like I've said 10x before, trust me, I know.
#55
I know from my experience, and I've seen it on two other 951s that I know were driven HARD here in WNY.
The 968 box wont be launched or power shifted, period. My car is being mostly retired to track duty and cruising. The bimmer on the other hand
The 968 box wont be launched or power shifted, period. My car is being mostly retired to track duty and cruising. The bimmer on the other hand
#56
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Originally Posted by toddk911
Telephone tough guy!!!!
Mike: Did you read that post about Rock? I know you have your own experiences too. Rock needs his 4th tranny. And as I said, he isn't even close by a hair as to what Blackus Amongus is looking to make.
#58
Thats one bad *** 951.... its funny how there are 951 owners out there that have Rolex/Guns worthy mods that arent on here or havent heard of rennlist. I was one of them until recently........ Too bad more Milledge or Gomes built car owners dont post here either......
#59
Originally Posted by Oddjob
Improper lube will increase heat, and increase wear on the surface of the teeth - it wont increase stress. You can get premature pitting and possibly galling on the teeth, but it wont lead to catastrophic tooth failures. Even if you ran the trans dry, I think the pinion bearings would seize up before the R/P would fail.
Increased stress will either come from increasing engine output or from impact loadings (as mentioned - the power shifting and hard lauches. etc...).
Increased stress will either come from increasing engine output or from impact loadings (as mentioned - the power shifting and hard lauches. etc...).
#60
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Originally Posted by hot-J
Thats one bad *** 951. Its funny how there are 951 owners out there that have Rolex/Guns worthy mods that arent on here or havent heard of rennlist. I was one of them until recently, Too bad more Milledge or Gomes built car owners dont post here either......
One Lister who had a great 2.5L was Tonyg. If you search, you'll find tons of threads by him, he's not as active as he used to be. He had a "very" worked 2.5L that he tracked often too. He made 400 RWHP+, and I don't ever recall him saying that he had any tranny problems too.
Black Amongus: How about a "bump" to my post #18?