2bridges

tial - Import Blow Out Sales - ebay retailer
search ebay item # 180076342948

stainless adapters - EuroPartsETC.com
The SFR adapters are I am sure good quality... for me the extra $30 for stainless was worth it.

should note that you can get all from EuroPartsETC.com with lighter spring... .8 bar I think for $349

vanwyk4257

Guys, at this point I don't think there's enough interest without having the adapters and wastegates together as a group buy to make it work. I honestly just don't have the time to try to put all of the parts together so I'm going to let this idea slide for a while. I may try to put something together in the future with adapters if I have the time. I just have to many projects at home and the office right now to make this work.

I apologize to those who expressed interest.

azmi951

I bought a set of Europroducts adaptors a few years ago and they are mild steel, not stainless.

Also I would never buy a tial WG off ebay. There are a ton of knockoffs on there. All Tial WGs will have a serial number on the diaphram cover and if you call tial they can tell you who originaly bought it and the spring it came with.

2bridges

Don't know about what they made a few years ago, but these are stainless.

Also I must agree that should be very carefull ith ebay tial purchase. A little common sense goes a long way. Don't buy from low end sellers, verify items are genuine, look at other items they sell and feedback. I have seen a few fake tial, no tial markings in housing, also odd marking on cover. From what I have seen they are very easy to identify fakes.

2bridges

New 1.0 bar tial 38 for $200
http://stores.ebay.com/Import-Blowou...QQftidZ2QQtZkm

FYI: to anybody curious. I recieved my items today (tial 38 and greddy profecB-specII)- Are genuine and authentic sealed in original new packaging, with SN . I have no reservatin about suggesting this ebay retailer to other folks looking for new 1.0 bar tial 38 for $200.

NOTE: I am not affiliated in any way with seller and as such do not personally guarantee anything

Everybody should use caution when dealing with anybody on ebay, especially with known fake items.
Due dilligence and research goes along way when dealing with anybody in such an easy-fraud environment, but this guy has come through for me.

TurboTim

We would be willing to do the adaptor plates and stainless hardware for $99 if there is 10 people or more and assuming it is ok with John D.We would do them for $89 if there are 20 or more people:^)


Tim

Porsche-O-Phile

Shoot, I'm down wit' it. Thanks!

Zeff

In for adaptors

nize

still in for both, although i think this thread/buy/whatever is dead.

5speed300

How come there are some of the 38mm 1.0bar wastegates that are $210 or $215? Are they all the same or what?

vanwyk4257

Guys, I will check to see what I can do for a tial 38 w/ either a .7 or 1.0 bar spring. Since someone else is offering to do the group buy on the spacers I would be willing to coordinate the orders on the wastegates if this is something that people really want to do. I guess the best thing might be to have people state which wastegate and spring they want specifically. I can verify prices accordingly and if everyone is on board I will have my friend order the wastegates once payment is received and everyone can order the spacers directly from Speedforce under the same group buy.

Let me know if this is something you want to move forward with by replying with what wastegate and spring combo you want. I will compile these in a spreadsheet on my home computer, email the file to my friend and get prices.

azmi951

I can order stuff directly from Tial. 10 38mm WG with whatever springs should not be a problem. This is only if your friend has problems.

5speed300

I'm probably in, 1 question though. I am running stock boost right now. Would it be ok if I ordered the .7Bar (11psi) spring and installed the wastegate now, and then later when I wanted to run 15psi just used an EBC to control boost? Or would I have to buy a 15psi spring?

Bri Bro

Spring Pressure is equal to the lowest boost you can run. With a boost controller, you can set the boost higher then the spring rate.

5speed300

Thought so, just wanted to make sure.

Count me in for a Wastegate with .7bar spring and the adapter pipes