Guns951

Rear Fuel Cell area

billthe3

Good stuff.

Have the widened the stock metal fenders out? I thought you had fiberglass stuff?

333pg333

Gabe, what's that indentation in pics 6 and 7?

gt37vgt

his rear wheel wells appear to go strait out i imagine the rusty panel will be above the centre of the rear wheel and the big lemans guards will go over top

Guns951

The rear fenders were cut out to provide clearance for the larger diameter wheels/tires and dropping the chassis by a couple of inches.

We're keeping as much of the stock body panel to provide rigidity as we want light weight but the chassis will want to twist with the amount of torque gonig through it.

The fiberglass flare will be glued to the body and shaped to follow the contour, this will give us a smooth inner fender well for better air flow over the rear tires and out the rear.

Patrick, I actually have no clue - but its on my "ask list" for the shop. I still need pics of the completed rear as this was before they finished it out.

333pg333

HEhehah not sure just how much room those 455's are going to need, but I'd imagine ****loads is a fair guess! That indentation sure seems like it could make an incursion into that room needed, but I could just be seeing it wrong. As Gabe mentions, the rear wheel arches have been cut out so maybe that is way inboard of where the tyre is going anyway?
Gabe, is there going to be an original bolt left on your beast?

Guns951

Yes actually, the roof...but that's it. And the tires we're using are 29" tall.

fast951

Guns, Good stuff. Glad to see you enjoying it, even from far away. Hope things are going well for you over there.

ibkevin

Yummy, yummy, yummy stuff here Gabe, I kinda started to think this project was growing tumble weeds.

Guns951

And another small update.

The cage is getting started asap.

TRP951

Awesome Gabe I cant wait to see what the chassis is going to look like completed

Duke

Whoa you were not kidding about the large tank

Guns951

Well after the cage is in, then we get to do the side exit exhaust & front frame and bodywork support to get the fiberglass on. At that point we can get the rear quarters on and she'll start looking like a GTR.

ehall

Gabe are you sure they're sending you pics of your car, rather than pics fromlarts garage?
Stasy safe bro. Glad to see it coming along.

Nurburger

This is an incredible project. Being able to follow progress is on a build such as this is one of the reasons we all frequent Rennlist. Thanks!

Sorry if I missed it in an earlier post, but do you have a specific plan for the Gulf livery? I've seen this car before & it looks amazing in the gulf blue & orange - are you planning something similar?