FS: SMT6, MAF, and EBC
11-02-2006, 04:44 PM
#1
Racer
Thread Starter
Join Date: Nov 2003
Location: NorCal
Posts: 440
Likes: 0
Received 0 Likes
on
0 Posts
FS: SMT6, MAF, and EBC
Ok just had some work done on my car and I took off some vitesse stage 2 parts. So now Im selling the SMT6 along with the chips and the MAF kit, and a greddy profec b spec 2 electronic boost controler. I wana sell the smt6 and maf as a kit for $700 and the EBC for $140.
The EBC is sold.
The EBC is sold.
Last edited by Tb311; 11-02-2006 at 11:32 PM.
11-02-2006, 05:31 PM
#5
Rennlist Member
May we ask what you've had done ... inquiring minds would like to know? I'm interested in the EBC, if it's still up for grabs.
Killer price on the VR MAF/chips/SMT6. Someone's going to be very happy.
Killer price on the VR MAF/chips/SMT6. Someone's going to be very happy.
11-02-2006, 08:17 PM
#6
Racer
Thread Starter
Join Date: Nov 2003
Location: NorCal
Posts: 440
Likes: 0
Received 0 Likes
on
0 Posts
The EBC is pending but the maf/chips/smt6 is still for sale. Also the chips are the old style chips not the newer one on the site. As far as my car I went back to the AFM and chips since the tuner shop that I took it to was more familiar with that setup. I would have loved to get the stage 2 working but I dont have anyone around my area to install it 
Trending Topics
11-03-2006, 08:41 AM
#12
Addict
Rennlist Member
Rennlist
Site Sponsor
Rennlist Member
Rennlist
Site Sponsor
Mark, you purchased this kit second hand, correct? Installing the MAF & PB is very simple, why not give it a try.
Not all VR MAF sensors are the same. In the early days, prior to the chip/board, we used various MAF sensors, depending on the application/stage.
Not all VR MAF sensors are the same. In the early days, prior to the chip/board, we used various MAF sensors, depending on the application/stage.
11-03-2006, 11:53 AM
#14
Racer
Thread Starter
Join Date: Nov 2003
Location: NorCal
Posts: 440
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by fast951
Mark, you purchased this kit second hand, correct? Installing the MAF & PB is very simple, why not give it a try.
Not all VR MAF sensors are the same. In the early days, prior to the chip/board, we used various MAF sensors, depending on the application/stage.
Not all VR MAF sensors are the same. In the early days, prior to the chip/board, we used various MAF sensors, depending on the application/stage.
. I decided to just go to a shop near my area but they were not really familiar with the SMT6 software so they just installed the turbo and tuned it with their chips. They did an good job except theres a little more lag then what I want and what I have seen people get. But if you were local John I would send it to you in a heart beat 
If I ever find someone reliable in my area that can install your kit and tune it right, I would probably buy the newer kit and do it all over again.