silverbullet

Hey,
I am having one hell of a time putting this testpipe in! I now have the pipe bolted up to the downpipe. But now I can't get the little pipe that connects to the wastegate to line up with the wastegate.

Should I take the testpipe off, reconnect the w/g pipe seperately, then try to put it back on? There's gotta be a few people out there that went through this and can share some pointers!

Thanks!

ibkevin

I started re-installing the sys from the test pipe back, slipped the WG dump on first, and aligned the downpipe bolts, done.