lart951

20 minutes away from your location.

gmsracing

I like the reflector! I think it helps make the lines homogeneous around the back of the car. Mine says Turbo. I guess I'm the only one.

lart951

My rear

2+2

I go back and forth....I sometimes like the reflector....sometimes I dont.....

My conclusion is that either way, the rear end of the 944/951 is just not that attractive stock and the reflector does not really help or harm the situation....I much prefer the 968 rear end.....

MichelleJD

I liked mine (also says "turbo"), but I put a euro bumper on the back and don't want to drill it for the license plate. I'm also debating what to do, leaning toward repair.

Eric

No, you aren't. While I wouldn't purchase one to install, if my car already had one, I may be inclined to leave it.

I had a lighted one on my 924 that read "porsche" and was smooth.

smac951

Originally it appears that the goal was to copy the rear of the 911 body style. But I think it made my 951 look ten years older. I personally think the tail end is one of the best features of the car. It looks wider and lower in my opinion with the original look.

--scott

lart951 I'll pm you concerning the reflector. It will fun to see your 951 also!

951_VAB

Try www.bumperplugs.com?

smac951

Okay, I received my Euro license plate from Germany and installed it over those horrible holes left from the center reflector. I like it!!!!

RRRandy

If you are still taking opinions, the reflector looked better than the bare metal and higher mounted license plate. Also, if nobody mentioned it, it’s not an after market piece. Its a real Porsche part/option. Hasn't changed since the old 924’s. They got little lights that you can barely see going down the road. That maybe what the holes were for.

smac951

Perhaps, but mine was a cheap aftermarket reflector. It looked like crap!

testarossa_td

Now it is time to red-out your tail lights to update that rear
Or course I went all red-out, but that makes backing up a little more tricky...

KuHL 951

I hated the center light on mine and pulled it off. The PO had boogered up the holes badly. I went with the hardware store black plugs and it will do for now on a black car. If you want to center the plate just do the mod to the stock bracket...works great.

Centering Rear Plate

chapstic951

Another thought would be to try and color match the plugs as a stop gap. I hope you left the plugs in to prevent any moisture from getting in side underneith the plate.


However, I really do like the europlate look....

lart951

The europlate between the stop lights and the license plate in the bumper that would look good, I am going to do it myself.