Hello all,

Looks like I have about got this stuff ready to send out. I am still waiting on the copper nuts, but they should arrive before the end of the week. I Might also be short the studs for the turbo hotside and the wastegate, but I hope they will arrive by Friday.

I will be leaving on vacation this Friday, and will not return for 10 days. I don't think I will have email or rennlist access while I am gone, so my goal is to get this stuff out to all that pay before I leave.

The total turbo Kit cost is $45 this includes every sealing fastener from the cylinder head to the tailpipe. It aslo includes Saturn studs and enough copper locknuts for eveything. If you want extra copper nuts the cost is .25 cents each for M8, and .51 cents each for M10's, just let me know.

NA guys -the cost will be around $15, but I have not finished assembling the kits. There is a good chance those could go out before friday as well.

If you dont need the studs or other hardware, you will recieve them anyway, I just have a pile of complete kits, and to seperate out certain pieces is just not cost effective for the group or myself. I priced out the "special" kits that people ordered and on average they wer $2-$6 cheaper, but I would be left with the bolts you don't need because I bought them by the boxes of 200. (For example Saturn studs are .33 cents per each)

All of you that PM'd me with an order, you will be recieving a PM today or tommorow with my paypal email, and address if you would prefer to send a check. I will also include my phone number so you can reach me directly if you have any questions.

Those of you that emailed after the order was placed, there should be another order happening in the very near future. It takes roughly 10-15 kits minimum to make the price happen, and I have almost that many new orders currently.

Thanks again for making this GB a success, I think everyone will be very pleased with the kits, they are excellent quality pieces and I can't wait to get them on my car!

 

aww I missed this

I really interested in the next order though--PM sent

 

Nice work Artie, Im sure this was alot of work on your end. Its appreciated.

 

PM's have been sent to everyone who has contacted me....

 

Yeah, what Sam said X 2 (and thanks also go to Matt).

 

awsome work. Most of my harwdare is new. I kinda regret using new porsche exhaust studs in the head rather then saturn. To much work to replace now though, especially since I loctited them in and all.

 

I sent a paypal - you may want to list if the $45 includes shipping. I sent $50 in case it doesnt - dont want you to get shortchanged. Also remember I believe paypal takes a ding if you receive money. May want to up the charge - I can send another $5 if ya need it.

Thanks again.

 

Artie, sent you $55 from benjaminplowe@hotmail.com. Hope this covers shipping, paypal, etc. Please let me know if there is a problem.

 

Soory I was unclear, guys that is more than generous, I can't immagine shipping will be more than $5. Thanks again for such prompt payment...I'll ship these things out same day when I recieve the copper nuts!

 

Great work Artie, looking forward to the next batch of hardware!

 

Artie, could you please quote charges to ship off the kit to France ?

I guess the amount is higher than $5.

Marc.

 

You can put me down for a 951 set for the next go-round. Thanks for putting this togeteher, wish I had seen it sooner, I'm dropping the entire exhuast this weekend for a Tial install

 

kinda OT, but I think this is a good place to ask without starting a new thread. There are these 3 seals I want to replace wihle swapping the wastegate. Numbers 21, 24, and 25 seen here: http://944online.com/cgi-local/ASI_S...ystem-944turbo
am I really facing 55 bucks plus shipping for these seals???

 

the seals on our exhausts are EXPENSIVE!!! I know a while back on the hardware thread someone had mentioned maybe doing a group buy on all the gaskets, I think there might be some interest if someone is willing to set it up. I just recently ordered all the seals, and I think I paid close to the $55 figure for those three seals. Its such a PITA to do that it's worth it though. Nothing worse than loosing boost becuase of aa annoying leak.

 

KuHL951....I added you to my list, please PM me if you don't mind so I can keep track of everything. It saves me from scrolling through all the threads when I go to look up orders.

Thanks!