To4e fitment
07-04-2005, 08:56 AM
#16
UAE Rennlist Ambassador
Rennlist Member
Rennlist Member
Originally Posted by NZ951
Sunset Porsche sell OEM parts at cost / plus 5%. No point paying more when you dont have to! Give Jeff a call... or I will get you his email if you like.
Sunset Porsche: 93060611800 TEMP SENSOR Special Order $34.24
Lindsey Racing: Code: 930-606-118-00
Price: $35.95
I know how you are indirectly screwing with my post and Lindsey racing, but it realy is not worth the $1.55 difference
Besides, i believe MySwiss has them for under $30, since you care so much on cheap parts!!!
07-04-2005, 11:58 AM
#18
Originally Posted by hosrom_951
FYI:
Sunset Porsche: 93060611800 TEMP SENSOR Special Order $34.24
Lindsey Racing: Code: 930-606-118-00
Price: $35.95
I know how you are indirectly screwing with my post and Lindsey racing, but it realy is not worth the $1.55 difference
Besides, i believe MySwiss has them for under $30, since you care so much on cheap parts!!!
Sunset Porsche: 93060611800 TEMP SENSOR Special Order $34.24
Lindsey Racing: Code: 930-606-118-00
Price: $35.95
I know how you are indirectly screwing with my post and Lindsey racing, but it realy is not worth the $1.55 difference
Besides, i believe MySwiss has them for under $30, since you care so much on cheap parts!!!
07-04-2005, 04:09 PM
#19
Race Director
So what you are saying Horsram is that I posted a source that was cheaper... ummmmmm wicked. Cheers. Why does every post need to be turned around into an issue about you? Build a bridge dude and get over it, I will send you some match sticks if you think it will help.
07-04-2005, 09:32 PM
#22
Nordschleife Master
Well neither are sponsors, so i wouldn't feel bad for buying from the cheaper place.
Question on the T04E stuff, i'm assuming most of these use a KKK center section and exhaust housing? I've been thinking about building one and wondering if the T04E is to big for the KKK #8 exhaust housing?
Question on the T04E stuff, i'm assuming most of these use a KKK center section and exhaust housing? I've been thinking about building one and wondering if the T04E is to big for the KKK #8 exhaust housing?
07-04-2005, 09:53 PM
#23
Jane Bond 007
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Originally Posted by David Floyd
Yep... I broke mine trying to heat and bend to fit, bought a used one and went the adapter route
07-04-2005, 10:07 PM
#24
Addict
Rennlist Member
Rennlist Member
Originally Posted by MichelleJD
I bought the adapters and still can't get it to fit. Do you have to bend the pipes a little bit?
If you are talking about the temp sensor in your other thread, then you might need the shorter sensor Napa# ECHFS158
Last edited by David Floyd; 07-04-2005 at 10:23 PM.
07-04-2005, 11:25 PM
#27
Jane Bond 007
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Originally Posted by David Floyd
no bending, what is not fitting?
If you are talking about the temp sensor in your other thread, then you might need the shorter sensor Napa# ECHFS158
If you are talking about the temp sensor in your other thread, then you might need the shorter sensor Napa# ECHFS158
07-05-2005, 02:07 AM
#29
Race Director
Wes / Brett LOTS of aftermarket tubo options for out cars use the #8. Some are machined more than others though obviously. The Pauerman turbo's are an example you may be interested in specifically.
