well, well, well.....SLEDGEHAMMER mustang dyno results
#19
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
WOW!!! WTH that's awesome Jim your da' man, now you can show your rear to rolexnj.
#22
Banned
Thread Starter
It is still stock intake manifold and stock intercooler. The intake has been port-matched to the sledgehammer - that is all.
The ignition is actually stock, at this point - NGKR 7's @25 thou.
I am sure the spark will smoothe out up top with the wasted spark.
Here is another tidbit for anyone who cares - all runs today were on 50 % xylene and 50% 93 pump. I have never experimented with this high a content of xylene because I was worried about possible ignition difficulties. However, I would say that the gamble paid off. The 951 wedge likes straight aromatics - it is as simple as that.
By the way, 50/50 xylene/93 yields an octane of about 105 - and a voracious flame front speed.
The ignition is actually stock, at this point - NGKR 7's @25 thou.
I am sure the spark will smoothe out up top with the wasted spark.
Here is another tidbit for anyone who cares - all runs today were on 50 % xylene and 50% 93 pump. I have never experimented with this high a content of xylene because I was worried about possible ignition difficulties. However, I would say that the gamble paid off. The 951 wedge likes straight aromatics - it is as simple as that.
By the way, 50/50 xylene/93 yields an octane of about 105 - and a voracious flame front speed.