hosrom_951

I believe Chris White did some NA block to turbo conversions, try contacting him (www.944enhancements.com).

Toolmaster

The older block will work fine. You do have to look into the oil passage for the turbo's oil lin e- but there isn't much else.

USe your turbo's head, and oil pan. Use the BLOCK's balance shaft covers. Use all the turbo internals - especially the pistons, and you'll also want to make sure you update the old block if needed with the newer water pump. I wouldn't re-use that anyway.

Pay careful attention to the turbo oil line... It NEEDS to be there.

HTH!

Jfrahm

Yeah but check the tolerance group of the pistons, they must be the same if you want to put the turbo pistons into the NA block.

-Joel.

eclou

Tolerance group info is stamped on the top of the piston IIRC

gcb951

To everyone,
Thanks for all the great info and advise. I will post pics soon of how the project is coming along.

Greg.