Mahle 100.5 and 101mm Pistons
#47
Addict
Rennlist Member
Rennlist Member
Thread Starter
Ok, just got off the phone with Mahle.
They are attempting to put this together with one of their customers(have no idea who and knew if I asked it wouldn't happen anyway) here in the US, who is interested after seeing the interest generated here, for a run of 80 sets, 100.5 and 101mm pistons. However, they still have lots of details to work out: market, cast vs forged, feroprint process, etc; so nothing in stone but it is certianly getting some attention.
They are attempting to put this together with one of their customers(have no idea who and knew if I asked it wouldn't happen anyway) here in the US, who is interested after seeing the interest generated here, for a run of 80 sets, 100.5 and 101mm pistons. However, they still have lots of details to work out: market, cast vs forged, feroprint process, etc; so nothing in stone but it is certianly getting some attention.
#48
Bret,
I probably know the answer to this but gotta ask anyway... what about timing? Think we might have a chance of seeing 'em before the end of this season if it happens?
I probably know the answer to this but gotta ask anyway... what about timing? Think we might have a chance of seeing 'em before the end of this season if it happens?
#49
Addict
Rennlist Member
Rennlist Member
Thread Starter
I really don't know. He did say the "customer" was VERY interested in making it happen and committed to 80 sets for the run. You know the old saying, money talks and bull$hit walks.
#51
Addict
Rennlist Member
Rennlist Member
Thread Starter
no, I asked about them and one other that I suspected...it could have been a supply house of German wholesale parts. Andial is connected well but in the end they are still a tuner, along with TRG, Powerhaus, Lindsey, or it could have been EBS or some other big engine part supplier. If it goes through we'll know soon enough.
#52
Addict
Rennlist Member
Rennlist Member
Join Date: May 2001
Location: A suburb of Silicon Valley, CA
Posts: 2,099
Likes: 0
Received 7 Likes
on
3 Posts
cast vs forged
But PLEASE....no cast pistons! Forged or forget it!
#55
Rennlist Member
Hey Bret
Is there any shot they would consider making the same pistions that Andial sells (not oversized )
for the stroker kit ?
And of course at a earthly price unlike Andial :-)
Regards
Ed
Is there any shot they would consider making the same pistions that Andial sells (not oversized )
for the stroker kit ?
And of course at a earthly price unlike Andial :-)
Regards
Ed
#56
Addict
Rennlist Member
Rennlist Member
Thread Starter
I'll check, I think LR has the stroker pistons...sorry, I'm stuck in a hotel in New Orleans waiting to see what Arlene does. Damn, I have to go down to the quarter tonight....sigh!!!!!!!
#57
Rennlist Member
Thanks Bret
I give them a call
Regards
Ed
Edit Good luck with the weather!!
Edit x2 YEEKS these guys are more expensive than Andial
I give them a call
Regards
Ed
Edit Good luck with the weather!!
Edit x2 YEEKS these guys are more expensive than Andial