Vitesse Stage II, 15psi pump gas dynos?
03-06-2005, 07:58 PM
#1
Racer
Thread Starter
Join Date: Sep 2004
Location: Australia
Posts: 253
Likes: 0
Received 0 Likes
on
0 Posts
Vitesse Stage II, 15psi pump gas dynos?
Has anyone got charts for stage 2 (old or new) runnning 15psi on pump gas?
I've searhed and can't find anything, Fast951 had lost all his old dyno charts due to a HD failure.
I've searhed and can't find anything, Fast951 had lost all his old dyno charts due to a HD failure.
03-06-2005, 09:30 PM
#2
Addict
Rennlist Member
Rennlist Member
Here is one but:
1. the car had an exhaust leak that was corrected later
2. this was the first time on the dyno after a complete rebuild
3. the owner was in the car and it was his first time on the dyno and the a/f ratio was very "safe". the car has since done a 319/328 15psi on 93 but I don't have a copy of that.
here is a link to the rebuild:
http://gallery.rennlist.com/gallery/albur13
1. the car had an exhaust leak that was corrected later
2. this was the first time on the dyno after a complete rebuild
3. the owner was in the car and it was his first time on the dyno and the a/f ratio was very "safe". the car has since done a 319/328 15psi on 93 but I don't have a copy of that.
here is a link to the rebuild:
http://gallery.rennlist.com/gallery/albur13
03-06-2005, 09:35 PM
#3
Racer
Thread Starter
Join Date: Sep 2004
Location: Australia
Posts: 253
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Ski
Here is one but:
1. the car had an exhaust leak that was corrected later
2. this was the first time on the dyno after a complete rebuild
3. the owner was in the car and it was his first time on the dyno. the car has since done a 319/328 15psi on 93 but I don't have a copy of that.
1. the car had an exhaust leak that was corrected later
2. this was the first time on the dyno after a complete rebuild
3. the owner was in the car and it was his first time on the dyno. the car has since done a 319/328 15psi on 93 but I don't have a copy of that.
You got a pic with the X-Axis?
03-06-2005, 09:42 PM
#4
Addict
Rennlist Member
Rennlist Member
no, that's an old pic "of a pic" 
. That's Jims street car after we rebuilt it. The a/f was so safe it cut down on the torque and power. The later run was on like 12.8-13 at onset of boost, then down to 11.8-12.1, topped out at 12.3.
This car now, it's engine is almost out, going 101mm 2.8 pistons, 3.0L crank, carrillo rods wtih Vitesse stage IV kit, 72# injectors - it's going to be wild.
. That's Jims street car after we rebuilt it. The a/f was so safe it cut down on the torque and power. The later run was on like 12.8-13 at onset of boost, then down to 11.8-12.1, topped out at 12.3. This car now, it's engine is almost out, going 101mm 2.8 pistons, 3.0L crank, carrillo rods wtih Vitesse stage IV kit, 72# injectors - it's going to be wild.
03-07-2005, 09:02 AM
#6
I dynod my "old" stage 2 kit, untuned (just running the chips, w/o the SMT6 hooked up), and made 305hp/305tq at the wheels at 14.5psi. I imagine I was in the 350rwhp range at 17psi after I tuned
-Randy
-Randy
