My first fibreglass effort! Intake partition... NOW WITH UPGRADES!
03-04-2005, 06:43 PM
#31
Race Director
Thread Starter
Originally Posted by Eyal 951
andrew,
Thats really cool and looks pretty clean! Nice work. and you have numbers too!
~Eyal
Thats really cool and looks pretty clean! Nice work. and you have numbers too!
~Eyal
03-04-2005, 07:35 PM
#33
Yes I have removed my headlight stopper. I am told its to stop the headlight from tiliting at very high speeds. Well, I cant legally go over 100 on the road here and would not speed at night. So I have no ill effects. I cant recall anyone else saying they have either, and I would think lots have done it. I used an angle grinder. Not the most pretty but effective! I painted the cut afterwards as well... in case it rusted.
I will grind off the stopper also.
And make a panel in a few weeks out of lexan.
Small projects like this are always fun to do.
I will post pics.
03-04-2005, 07:43 PM
#34
Race Director
Thread Starter
Good stuff Edman.
Make sure you check out the interation with the turbo water pump cooling in place. Mine is gone and I cant remember if it will influence how the panel will sit and its design etc.
Obviously put a blanket over your engine and paint when you grnd! Lots of sparks....
Lets not name it till someone else uses the design! lol
Make sure you check out the interation with the turbo water pump cooling in place. Mine is gone and I cant remember if it will influence how the panel will sit and its design etc.
Obviously put a blanket over your engine and paint when you grnd! Lots of sparks....
Lets not name it till someone else uses the design! lol
03-04-2005, 08:32 PM
#36
Race Director
Thread Starter
Brian,
Make sure you give youself some slack (make a bigger shape) so you can file it down for a tight fit
Post pics when its done! It should not take too long to fab up!
Make sure you give youself some slack (make a bigger shape) so you can file it down for a tight fit
Post pics when its done! It should not take too long to fab up!
03-04-2005, 09:00 PM
#41
Rocket Scientist
Rennlist Member
Rennlist Member
Originally Posted by hosrom_951
So, you basically have no driver's side headlight??
03-04-2005, 09:08 PM
#42
Addict
Rennlist Member
Rennlist Member
Join Date: Feb 2002
Posts: 5,384
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by NZ951
What is that jibberish measurement system you speak of? lol
You poor guys!
You poor guys!
03-04-2005, 09:10 PM
#43
Race Director
Thread Starter
Originally Posted by beab951
Right, we went metric in the 80's but it is hard to loose the English in us.
03-04-2005, 09:18 PM
#44
Addict
Rennlist Member
Rennlist Member
Join Date: Feb 2002
Posts: 5,384
Likes: 0
Received 0 Likes
on
0 Posts
Were do you think we got the this crazy system from. When we buy tools in the US, they come in English and metric sizes.
"Imperial units are the measurement units that were historically used in the British Commonwealth countries. They were very similar, but not identical, to the units that are still predominantly used in the United States."
http://www.metric-conversion-tables....easurement.htm
"Imperial units are the measurement units that were historically used in the British Commonwealth countries. They were very similar, but not identical, to the units that are still predominantly used in the United States."
http://www.metric-conversion-tables....easurement.htm