55lb injectors - adding to the confusion ...
03-04-2005, 03:54 PM
#16
Banned
Every time you go to larger injectors with the stock afm you run into problems. You need a properly sized maf meter to run them correctly. It doesn't have much to do with the dme.
03-04-2005, 04:03 PM
#18
Addict
Rennlist Member
Rennlist
Site Sponsor
Rennlist Member
Rennlist
Site Sponsor
Originally Posted by hosrom_951
Jimbo: Even with a MAF, anything over 72lbs/hr would cause problems with stock computers.
Not if you use the latest Vitesse semi-batch chips
03-04-2005, 04:05 PM
#21
Addict
Rennlist Member
Rennlist
Site Sponsor
Rennlist Member
Rennlist
Site Sponsor
Originally Posted by jimbo1111
Every time you go to larger injectors with the stock afm you run into problems. You need a properly sized maf meter to run them correctly. It doesn't have much to do with the dme.
Yes it does.. When the injectors duty cycle drops below a certain level, the injectors will not operate properly. The DME operates in full batch mode, going to semi-batch raises the duty cycle per injector to an acceptable level...
03-04-2005, 04:15 PM
#22
UAE Rennlist Ambassador
Rennlist Member
Rennlist Member
Originally Posted by fast951
Not if you use the latest Vitesse semi-batch chips
03-04-2005, 08:20 PM
#27
Race Director
Originally Posted by awilson40
man.... you are such a tease
John, make and test (dyno timing detonation etc) a water injection kit thats STANDALONE of any of your other products. Next week will be fine. We need to put this thing to bed with some real figures.
03-04-2005, 08:23 PM
#28
Addict
Rennlist Member
Rennlist
Site Sponsor
Rennlist Member
Rennlist
Site Sponsor
Ok a hint (more testing in process, so averything is "work in progress")..
It's the size of a chip, can hold more information than a chip. Noticed the 4 dip switches? Stay tuned!
It's the size of a chip, can hold more information than a chip. Noticed the 4 dip switches? Stay tuned!