tial 38mm and profecB
12-24-2004, 06:00 PM
#1
Burning Brakes
Thread Starter
Join Date: Sep 2001
Location: Natick MA
Posts: 1,164
Likes: 0
Received 0 Likes
on
0 Posts
tial 38mm and profecB
i need a new wastegate, anyone know a good place to grab one of these for a good price?
Last edited by Andre; 12-24-2004 at 08:19 PM.
12-25-2004, 03:30 PM
#6
Race Car
Join Date: Oct 2003
Location: Pueblo,CO
Posts: 3,591
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Andre
anyone know if the 38mm tial from sfr works well with the profecB boost controller?
Trending Topics
12-26-2004, 05:23 PM
#10
Race Director
Andre,
If you want a cheap solution, (sorry to annoy the vendors here...) this is what I did. Got a Tial off eBay (for 215), then used the tial flanges and had a pipe welded in to fit the stock exhaust tie in. That cost around 50.
If you want a cheap solution, (sorry to annoy the vendors here...) this is what I did. Got a Tial off eBay (for 215), then used the tial flanges and had a pipe welded in to fit the stock exhaust tie in. That cost around 50.
12-26-2004, 06:59 PM
#11
Pro
Join Date: Sep 2002
Location: Montreal and Texas
Posts: 554
Likes: 0
Received 0 Likes
on
0 Posts
Andre. Yes I have used the Profec B with great results. I actually like the Profec B better then the spec 2, for the simplicity.
NZ951. Your right that you did save a bit of money, but you still had to get it welded. Unless you do your own welding yourself, your not actuallyu saving anything. Your cost for the Tial was 215$ plus shipping, plus the flanges 50$ plus shipping, plus the welding and fitting, at least 20$. You easily spend 300$ with shipping for the hole kit.
We sell, our ready to bolt on kits for 315$ , at your door, in the continental USNo welding or fabrication needed.
You can often save a few buck on these cars , but at what cost??????
NZ951. Your right that you did save a bit of money, but you still had to get it welded. Unless you do your own welding yourself, your not actuallyu saving anything. Your cost for the Tial was 215$ plus shipping, plus the flanges 50$ plus shipping, plus the welding and fitting, at least 20$. You easily spend 300$ with shipping for the hole kit.
We sell, our ready to bolt on kits for 315$ , at your door, in the continental USNo welding or fabrication needed.
You can often save a few buck on these cars , but at what cost??????
12-26-2004, 09:23 PM
#12
Racer
Join Date: Aug 2003
Location: Oslo, Norway
Posts: 445
Likes: 0
Received 0 Likes
on
0 Posts
Since we`re already talking about Profec B, anybody testet the profec B (spec 2 also) vs Profec E-01? who`s the best boost controller? Do they both controll the boost the best way, or is one of them better than the other? I dont care about all the screens and high tech fasilities, but cares about boost controll and spool up time! Anyone testet those with the LR DualPort WG?
