Bay Area Machine Shop
11-25-2004, 03:45 PM
#1
Rennlist Member
Thread Starter
Bay Area Machine Shop
Can anyone recommend a machine shop in the south bay with the equipement and experience to work on our blocks/bores? I am starting to have doubts about my shop, despite its reputation and client list...
Does Devek do machine work or farm it out? If farmed out, to whom?
Does Devek do machine work or farm it out? If farmed out, to whom?
11-28-2004, 12:43 AM
#3
Three Wheelin'
Join Date: Dec 2002
Location: San Francisco Bay Area, CA
Posts: 1,485
Likes: 0
Received 1 Like
on
1 Post
I don't know a local machine shop directly, but I have heard good stories from folks using my local P-car shop (www.heyerperformance.com, Mountain View) to work on their blocks.
Tony is the owner, and I believe he outsources the work to his connection of machine shops. I think he charges some fair overhead, but he would also add his value to make sure the job is done well.
If you couldn't find a machine shop, try give Tony a call. He is a good guy and I am sure he can help.
With best regards,
- Alex (87 Diamond Blue 951, 00 Artic Silver 986S)
Tony is the owner, and I believe he outsources the work to his connection of machine shops. I think he charges some fair overhead, but he would also add his value to make sure the job is done well.
If you couldn't find a machine shop, try give Tony a call. He is a good guy and I am sure he can help.
With best regards,
- Alex (87 Diamond Blue 951, 00 Artic Silver 986S)
11-28-2004, 02:26 AM
#4
Rennlist Member
Hey Tom
I was thinking Why don't you call Helmut at Precision Motor works in Santa Clara and see who he would recommends. He is is about as honest as they get and I think he knows his $hit....
Regards
Ed
I was thinking Why don't you call Helmut at Precision Motor works in Santa Clara and see who he would recommends. He is is about as honest as they get and I think he knows his $hit....
Regards
Ed
