Show your 951 pics here......
The following users liked this post:
DasSilberWedge (09-21-2021)
#4157
Rennlist Member
#4158
Three Wheelin'
Busy weekend
- fixed front left turn signal
- installed new 968 roof antenna - PO had replaced windshield with one that doesn’t have antenna. Like this type for performance and appearance - note, not all roof antennas you will find are at same angle.. I got mine from http://theantennasource.com/ and the cable from Roger at 928srus.com (have to call to get as not listed on their site, Roger is THE MAN for Porsche parts!)
- reglued some spots where vinyl shrank/came undone
- Installed new windshield washer pump
- fixed front left turn signal
- installed new 968 roof antenna - PO had replaced windshield with one that doesn’t have antenna. Like this type for performance and appearance - note, not all roof antennas you will find are at same angle.. I got mine from http://theantennasource.com/ and the cable from Roger at 928srus.com (have to call to get as not listed on their site, Roger is THE MAN for Porsche parts!)
- reglued some spots where vinyl shrank/came undone
- Installed new windshield washer pump
The following 2 users liked this post by JET951:
Crazy Eddie (03-05-2020),
rsabeebe (03-04-2020)
The following 3 users liked this post by Nurburger:
The following users liked this post:
JET951 (03-10-2020)
#4164
Rennlist Member
Nurburger, I've been drooling over the pix of your car for several years!
Really nice leather upgrades...local or one of the vendors in Panorama/Excellence?
Thanks for sharing.
Really nice leather upgrades...local or one of the vendors in Panorama/Excellence?
Thanks for sharing.
#4166
Rennlist Member
Join Date: Oct 2007
Location: Racking up air miles....
Posts: 3,717
Likes: 0
Received 639 Likes
on
271 Posts
I'm lucky to have Rod Klinghoffer (Hof Designs) and Classic 9 local to me. Rod does the cutting & sewing of the leather and C9 does the install. Here's my original project thread in case you missed it:
https://rennlist.com/forums/944-turb...-classic9.html
#4168
Rennlist Member
Its a CPR (Chris Patrick) splitter made out of ABS. Used ones pop up for sale occasionally on the Rennlist and Pelican boards
CPR V1 splitter
Dan.
CPR V1 splitter
Dan.