Official post-ZT-2 wideband GB installation thread... Q/A...
#33
Addict
Rennlist Member
Rennlist Member
Question: I'm going to get my bung welded in shortly. However, once the bung is in, I want something to plug the bung temporarily until I'm actually ready to install the WBO2 sensor itself. What fits in the hole (besides the O2 sensor itself)? What's the thread size?
#35
Burning Brakes
Joined: Jun 2001
Posts: 1,232
Likes: 0
Received 0 Likes
on
0 Posts
From: Stockholm, Sweden
Originally Posted by tommo951
Don't Laugh Walmart has made it to UK. They bought ASDA stores and are still considering changing the name to Walmart! The Walmart corporate machines knows no borders..........
They will be in Norway before you know it!
On another front just received my ZT-2 now that is service, sent Monday from California. Received Thursday Kent UK. And didn't have to pay any duty on it!!
I have been waiting 4-5 weeks for some parcels coming from US supposedly sent Air Freight! Good service Zeitronix!!!
They will be in Norway before you know it!
On another front just received my ZT-2 now that is service, sent Monday from California. Received Thursday Kent UK. And didn't have to pay any duty on it!!
I have been waiting 4-5 weeks for some parcels coming from US supposedly sent Air Freight! Good service Zeitronix!!!
After I mailed them they put the value to 80 USD so no duty for me either, the VAT here is the real reason for our drinking culture...
#37
Addict
Rennlist Member
Rennlist Member
Originally Posted by schnellfahrer
What would be the proper size for this application?
#40
Rennlist Member
Originally Posted by Jake951
Question: I'm going to get my bung welded in shortly. However, once the bung is in, I want something to plug the bung temporarily until I'm actually ready to install the WBO2 sensor itself. What fits in the hole (besides the O2 sensor itself)? What's the thread size?
you can get plugs anyplace thay sells the bungs. Or, just go to any junk yard and pick up a used narrow band O2 sensor from any import (domestic too for all I know). I had my old stock one laying around, and it screwed right in.
#42
Race Director
Zt-2 pin 1 - red - switched power = DME pin 18, 1.5mm red/yellow
Zt-2 pin 2 - white - wideband out = not used
Zt-2 pin 3 - green - RPM 0-5V = DME pin 21 solid green 1.0mm
Zt-2 pin 4 - orange - boost sensor = boost sensor green
Zt-2 pin 5 - empty
Zt-2 pin 6 - yellow - boost sensor = boost sensor red
Zt-2 pin 7 - black - power ground = DME pin 5, 1.5mm brown
Zt-2 pin 8 - brown - sensor ground = boost sensor black
Zt-2 pin 9 - purple - narrow O2 out = not used
Zt-2 pin 10 - grey - TPS = KLR pin 22, 1.0mm white/green
Zt-2 pin 11 - brown - sensor ground = not used
Zt-2 pin 12 - blue - user input = not used
Zt-2 pin 2 - white - wideband out = not used
Zt-2 pin 3 - green - RPM 0-5V = DME pin 21 solid green 1.0mm
Zt-2 pin 4 - orange - boost sensor = boost sensor green
Zt-2 pin 5 - empty
Zt-2 pin 6 - yellow - boost sensor = boost sensor red
Zt-2 pin 7 - black - power ground = DME pin 5, 1.5mm brown
Zt-2 pin 8 - brown - sensor ground = boost sensor black
Zt-2 pin 9 - purple - narrow O2 out = not used
Zt-2 pin 10 - grey - TPS = KLR pin 22, 1.0mm white/green
Zt-2 pin 11 - brown - sensor ground = not used
Zt-2 pin 12 - blue - user input = not used