Notices
944 Turbo and Turbo-S Forum 1982-1991
Sponsored by:
Sponsored by: Clore Automotive

Air flow meter test.

Thread Tools
 
Search this Thread
 
Old 10-15-2023, 10:31 PM
  #1  
944951
5th Gear
Thread Starter
 
944951's Avatar
 
Join Date: Dec 2015
Posts: 5
Received 0 Likes on 0 Posts
Default Air flow meter test.

Besides Clark's garage, what is a proven way to test the AFM? All the Clark's garage testing has been done. Values are good. Still having a hard start and rough idle. ICV is 10 months old.
Old 10-16-2023, 07:56 AM
  #2  
931guru
Rennlist Member
 
931guru's Avatar
 
Join Date: Feb 2007
Posts: 2,711
Received 319 Likes on 261 Posts
Default

Take it to another car, install, see if the symptom follows the part.
The following users liked this post:
944951 (10-16-2023)
Old 10-16-2023, 05:57 PM
  #3  
walfreyydo
Burning Brakes
 
walfreyydo's Avatar
 
Join Date: Oct 2021
Location: Southern WI - 89S2 Megasquirt PNP
Posts: 1,208
Received 266 Likes on 232 Posts
Default

DME temp sensor replaced? Thats the lowest hanging fruit of them all
Old 10-16-2023, 06:06 PM
  #4  
944951
5th Gear
Thread Starter
 
944951's Avatar
 
Join Date: Dec 2015
Posts: 5
Received 0 Likes on 0 Posts
Default

Yes, twice in 3 years. Resistance values have been checked. Rebuilt DME.
Old 10-17-2023, 02:28 PM
  #5  
walfreyydo
Burning Brakes
 
walfreyydo's Avatar
 
Join Date: Oct 2021
Location: Southern WI - 89S2 Megasquirt PNP
Posts: 1,208
Received 266 Likes on 232 Posts
Default

Whats your fuel pressure at the rail while cranking/running? And after the car has sat 20 mins?
Old 10-17-2023, 07:19 PM
  #6  
944951
5th Gear
Thread Starter
 
944951's Avatar
 
Join Date: Dec 2015
Posts: 5
Received 0 Likes on 0 Posts
Default

Fuel pressure cranking 3 bar.( 3 bar FPR from lindsey.) Running haven't check. I have replaced the check valve at the pump. It takes about 3-4 cranks then starts,rough idle, then somewhat smooths out.,about 5-10 minutes. Thank for reply.



Quick Reply: Air flow meter test.



All times are GMT -3. The time now is 11:26 PM.