Anyone ever source the small needle bearing on our steering racks? The little INA bearing that seals the bottom of the housing. Mine is broken. Need to source new one.

 

I tore mine up tightening the upper bolts once after I had it apart. I was able to source one locally relatively easily based on the numbers printed on the bearing.

 

 

Looks like I bought mine from these guys. Might try them if the usual sources (eBay, etc...) don't turn up anything.

 

Thanks for the info guys.

I see a couple on ebay......but LOL they want 50.00$ for shipping. I will get a friend in the US to get some from your E.B. Atmus source if I can't get locally.

 

This seems to be quite common. On a couple of occasions I have contacted the seller and it turns out that the actual shipping cost is much less than what is advertised . . . . but sometimes that is actually what it costs!