KKK turbo oil passage way drilling
12-08-2003, 12:47 AM
#1
Rennlist Member
Thread Starter
KKK turbo oil passage way drilling
With all the recent talk of using oil supply restrictors on garret hybrid turbos, I thought I would post this picture of my K26/8 that I just pulled off.
I remember someone saying that the KKK had a small restriction on the oil passage way, here it is. Its about .090", a 3/32 drill just about fits it. This might help those concerned about putting restrictors on their garrets. Even with a 1/16" (.062) restrictor its not too far from stock.
I remember someone saying that the KKK had a small restriction on the oil passage way, here it is. Its about .090", a 3/32 drill just about fits it. This might help those concerned about putting restrictors on their garrets. Even with a 1/16" (.062) restrictor its not too far from stock.
