When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
A short update, things have been going a little slowly. I am still awaiting my flywheel which I have been told should be finish this week. While I've been waiting I have made the exhaust system, a couple of pictures to show what I have done
Well at last, I have finally received my flywheel from the machine shop. I have had it made to except a AP twin sprung centred organic clutch. Centre push clutch. Should be driver friendly.
Wow, nice looking exhaust system. Looks kind of close to that control arm castor block though. I would keep my eye on that bushing if I were you. Update to the newer style 968 blocks when it happens.
Wow, nice looking exhaust system. Looks kind of close to that control arm castor block though. I would keep my eye on that bushing if I were you. Update to the newer style 968 blocks when it happens.
Looks like this is going to be a nice car.
Thanks for the good comments. Yes, I may have to make an heat shield for that.
Originally Posted by Rugxth
What size are the new wheels/tires?
The fronts are 18 x 8.5 with 235/40 tyres and the rear are 18 x 10 with 265/35 's