When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Decided to change it up, no longer black...hello satin nickel metallic... This is gonna be a job Needs a little refurb Even parts unseen need to be refreshed... Half way Niiiiice! notice the replaced broken card edge?
Last edited by AirtekHVAC; 03-27-2021 at 11:56 AM.
Gauges refurbed Housing ready for some more glorious years of duty! Although I had rebuilt the foil, was not happy with it, so I pulled the trigger on the card type replacement, got a deal on eBay, with warranty, so I had to do it, (already tested, works) still cost more than I paid for the car....I didn’t use the supplied wire, used 18ga thermostat wire...rigid, solid, and “mold-able” for a neat, clean look. All assembled glue drying...checkout that shiny lens! Several hours of elbow grease and Plastic-X creme
Raw boards, added the Porsche logo 928 numbers added Not pictured...(3) coats of acrylic lacquer Added light ring underneath Light ring installed. I will bring these to the next event I attend.
Got the repaired seat back from the upholstery shop. Pretty darn happy with it. He saved as much of the old fabric as possible. Pics don’t do it justice. They also replaced the vinyl on the rear upper that was all cracked up...