Marti

Hi Guys

I am wondering if anyone can help with a part number for the washers that are used for the 5 or 6 screws which hold the sill cover onto the alloy rail which is bolted to the sill?

They don't seem to appear on the PET, I can only see the screws. The washers are formed to take a countersunk screw head.

I am either looking for a part number or a set of these

Thanks
Marti

Jerry Feather

No help so far because I suspect no one has a clue about what you are talking about. What kind of sill?

I buy thin stainless steel countersunk washers in #6 and #8 screw sizes from an aviation supply company.

ROG100

Marti - it would really help if you added the year and model of your car.
By sill cover do you mean the scuff plate on the door sill? Black with "928" in the middle?
A picture would work wonders.

Marti

Hi Guys, I am referring to the S4 / GTS plastic still covers which run along the lower side of car, not the black scuff plates.

The cover is held in place by 5 or 6 screws which are hidden by a black plastic cover strip in the door step and under the car they are held on by 8 or so screws which go onto into plastic grommets.

The screws in the door step section sit in small metal washers which are designed to take the countersunk screw head.

Hopefully that pin points the part I am looking for - the metal washers for the countersunk screws.

Randy V

Pics!

Marti

Metal washer that countersink screw sits in
Pic of no screw and no washer

ROG100

You should be looking at PET illustration 810-5.
My educated guess is spacer sleeve 928 559 314 00 and PET has the quantity wrong - should be 12 and not 2.
Order one to make sure it is the right part.

Marti

That was what I thought, I think I will give that a go. I will report back my findings.

Regards
Marti

Marti

So I checked with porsche and the part is no longer available. Is anyone using an alternative supply for this part?

Randy V

Call 928 International - they probably have a box of 'em.

Marti

After contacting Tom at 928 international a set are on the way. Thanks for the guidance and thanks to 928 international for keeping the project moving forward.

Randy V

Almost worth the price of Membership.

Marti

I need the part on the left
I need the part in the middle
Unfortunately in the end 928 international did not have the part so I am still looking for a set of 12 of these.

I have attached a picture of the part for further clarity. Does anyone have these?

ROG100

Try ----
999 591 717 40 Expander Nut
N 011 665 3 Washer 5.3
900 143 085 07 Tapping Screw 4.5 x 16

Marti

Does anyone have any spare of these washers? They would have to come from a car being parted out or new old stock?