When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Just installed mine, replacing an aging Jager **** (with Jager short shift boot and cover plate).
What is the purpose of extended plastic collar at the base of the ****? I can't get my boot to go over it to cover it up and make a clean transition from **** to boot.
An FYI for those that have auto's and the shifter grates are pooched. I picked one of these up from Paul many years ago and it came with the surround that has the adhesive. Instead of using that I bought a 5 speed surround from Rog and put it on the boot. Fits perfect and snaps in place with no chance of moving around. This is a fantastic product from Paul, I wouldn't hesitate to jump on another one if I needed one.
your boot should go over the collar. Your boot might be a bit tight. You can shave or sand some of the collar to get the boot to go over it.
The way I do it is to get one of the tabs in the collar of the boot and then turn the **** while holding the boot. Kind of "screwing" it in. Being careful not to damage the leather.
Also for those who bought a shifter and have not received the email with the instructions, here it is:
An FYI for those that have auto's and the shifter grates are pooched. I picked one of these up from Paul many years ago and it came with the surround that has the adhesive. Instead of using that I bought a 5 speed surround from Rog and put it on the boot. Fits perfect and snaps in place with no chance of moving around. This is a fantastic product from Paul, I wouldn't hesitate to jump on another one if I needed one.
Pic?
Originally Posted by Champagne
Hey Randy,
your boot should go over the collar. Your boot might be a bit tight. You can shave or sand some of the collar to get the boot to go over it.
The way I do it is to get one of the tabs in the collar of the boot and then turn the **** while holding the boot. Kind of "screwing" it in. Being careful not to damage the leather.
Just got mine over the weekend for Turq. The current shifter is a little loose and creates a slight rattle on acceleration. Looking forward to putting this one on. Plus, Paul matched the same Pascha as the interior so it's going to look really nice.
Just installed mine, replacing an aging Jager **** (with Jager short shift boot and cover plate).
What is the purpose of extended plastic collar at the base of the ****? I can't get my boot to go over it to cover it up and make a clean transition from **** to boot.
Is that a manual shift pattern on the rear wiper switch?