FS: 85-86 100mm pistons with 2-valve reliefs, for 5.0L 16V 'hybrid' engine build
12-09-2016, 11:55 AM
#1
Rennlist Member
Thread Starter
FS: 85-86 100mm pistons with 2-valve reliefs, for 5.0L 16V 'hybrid' engine build
As the title says, 85-86 100mm pistons with 2-valve reliefs, for 5.0L 16V 'hybrid' engine build.
Save yourself the time and money of cutting 16 valve reliefs - these are already done, ready to install.
Set of 8 matching, stamped tolerance group '1' - for use with 5.0L short block also with tol group 1.
Rings and wrist pins included.
$350 plus shipping, Conus only. PayPal preferred.
Thanks!
Save yourself the time and money of cutting 16 valve reliefs - these are already done, ready to install.
Set of 8 matching, stamped tolerance group '1' - for use with 5.0L short block also with tol group 1.
Rings and wrist pins included.
$350 plus shipping, Conus only. PayPal preferred.
Thanks!
12-12-2016, 01:10 AM
#6
Rennlist Member
Thread Starter
^^^ Greg, I don't know. I received them this way.
Let me know what to check for specifically, and I'll do my best to answer. Thx!
Let me know what to check for specifically, and I'll do my best to answer. Thx!
12-12-2016, 01:04 PM
#7
Rennlist Member
It looks to me like both 16V reliefs were cut on the exhaust side of all 8 and they appear to be identical cuts for both valve reliefs.
Last edited by Kiln_Red; 12-12-2016 at 01:38 PM.
Trending Topics
12-12-2016, 01:17 PM
#8
Rennlist Member
Thread Starter