linderpat

Blumaxx does not have a vin plate there either. I'm not sure when Porsche started putting the vin in that spot too.
Thanks for all of the responses.

Dave928S

My 82 has no cutout or marking in that location, but my GTS does. Here's a close up the one on the GTS. It's not stamped with a number punch, but looks like its been done to a number template with a mechanical needle punch engraver.

GT6ixer

Probably the honorable thing to do. You want me to yank the stolen radio for you before they lock me up?

The Deputy

Probably should...the original owner will probably just remove it...and then throw it in the trash...like every 928 owner before him...lol.

linderpat

looked at the car today. No VIN in the space. Not painted over, not stamped, no nothing. Strange. Reworked front clip maybe?

Guy

FWIW, my 1979 and my former 80 Euro didn't have it . The 81 and 83 do have it. I wonder if it coincided with the start of 17 digit VIN

Rob Edwards

Ding, ding, ding. From the 1981 Service Info Tech book- note at the bottom:

GT6ixer

Here's mine. The ZZZ freaked me out for a sec. Thought Brian may have jinxed my car into actually being stolen before I found that it was common for US spec cars to get the ZZZ stamp in the chassis. Phewww!

SwedeInSiam

The started with the cut out location in the early 80's, not sure what year.
My 1980 still have it stamped behind the jump post.

9two8

Mine is likewise.

linderpat

Nate, the ZZZ is a Euro spec designation. US cars do not have that.

jetson8859

Don't think that is correct, both my 87s4 nd 93 GTS have the ZZZ in the number stamped in passenger fender. See pics below



87s4



93 GTS

GT6ixer

I agree Ed, but not on the chassis VIN. I did some thread searching and ZZZ were stamped on the chassis before they knew what country the car was headed to.

linderpat

Thanks Gents - that is most interesting, and the first I have heard of that.

Hold On

My 83 has the number stamped in the portion of the chassis that is uncovered by the aluminum fender sheet metal. That way if I ever have to have fender replaced, The chassis serial number stays in place.