dzaprev

Hey guys just wondering if anyone used Injector Experts in Ohio , they have a 1 day turn around and I want to get my new 928 running quickly . I know Which Hunters are good but their on a 9 day turn around .

rbrtmchl

Hi Dave, sorry I can't answer your question. What did you pick up? Let's see some pictures!

dzaprev

1980 / Auto trans . It's very original got tool kit, light bulbs & factory repair manuals. I post some pics

dzaprev

Nobody?

SteveG

The hurrier I go the behinder I get.

harveyf

Give your business to Witchhunter and know that it will be done right. Peace of mind should be worth 9 days.

Clill

I sent mine to Witchhunter and was very happy with the turn around time and work they did.

mark928gt

I see on Witchhunter's site they are no longer accepting shipments of injectors "so they can get their backlog down". I find this a curious business decision.

Are there no other places anyone would recommend for injector cleaning and service? Any places in Denver or on the front range anyone would recommend?

soontobered84

I used Cruzin Performance several years ago and was very pleased with the service. No affiliation

dr bob

There's nothing particularly exotic about the Bosch injectors in the 928. We "support" a few vendors like Witchhunter who offer great service. Any good injector-cleaning place should be able to give you similar results. But... Some injectors (S4+ for sure) take different o-ring sizes than what the same injector uses when installed in a Mustang or whatever. Your options then move to getting the correct o-rings from one of our favorite parts vendors, and installing them yourself on your newly-cleaned injectors. Or buying a set of already-cleaned and outfitted injectors from these same vendors on an exchange basis.

Several years ago now, there was a sale from one of the Ford performance parts places on new Ford Racing 19# injectors for a Mustang. With the correct 0-rings, they were a drop-in fit in my S4. Other cars use the same injectors you have in your 1980 928, may just take a little research here. Regardless, new correct o-rings need to be fitted either by the rebuilder or by you.

dzaprev

Thanks for the response guys . I was feeling left out with no responses...lol