Hello 1978 in Continental Orange
#77
Ruisteves,
Your model might differ, but installing MSDS headers will preclude you from doing any kind of clutch work inside the lower bell housing without loosening or removing at least one of the headers. (My favorite and the easier one to loosen is the right side one, BTW)
The power gains can make MSDS worth it, but you should at least know the downside.
Great looking car, BTW!
Your model might differ, but installing MSDS headers will preclude you from doing any kind of clutch work inside the lower bell housing without loosening or removing at least one of the headers. (My favorite and the easier one to loosen is the right side one, BTW)
The power gains can make MSDS worth it, but you should at least know the downside.
Great looking car, BTW!
#78
hey guys... the preservation continues... had lots more work done, lots of bits and pieces. came across a spare set of teledials so i got them painted white.
she's running like a dream... still quite a few bits and pieces to sort out but she's coming along nicely...
If anyone has got a good spare centre console bezel - I am looking for one!
she's running like a dream... still quite a few bits and pieces to sort out but she's coming along nicely...
If anyone has got a good spare centre console bezel - I am looking for one!
#81
Check with RL’r: GT6ixer regarding 3D center console bezels^^https://www.ecstuning.com/b-h-and-r-...hoC4oEQAvD_BwE
can even go up to 35mm as I did on Mokka....
can even go up to 35mm as I did on Mokka....
Last edited by 77tony; 04-22-2018 at 01:29 AM.
#86
I am the guy working on a reproduction for the center console bezel, both 1-hole and 3-hole versions. Here is the thread for the project. It's been a while but I finally have some more time to dedicate to it. I hope to have these ready to offer later in the summer.
#87
First off, killer 928! Those pictures are great. Continental Orange is definitely in my top 3 favorite colors.
I am the guy working on a reproduction for the center console bezel, both 1-hole and 3-hole versions. Here is the thread for the project. It's been a while but I finally have some more time to dedicate to it. I hope to have these ready to offer later in the summer.
I am the guy working on a reproduction for the center console bezel, both 1-hole and 3-hole versions. Here is the thread for the project. It's been a while but I finally have some more time to dedicate to it. I hope to have these ready to offer later in the summer.
#88
Very nice and am sure the process has been rewarding. Just curious on the approximate investment so far...pictures look priceless.
I will take one of the posters when you make them...the one with it on the lift. No Joke...pretty sure there is a solid market for that image on a poster.
I will take one of the posters when you make them...the one with it on the lift. No Joke...pretty sure there is a solid market for that image on a poster.
#89
Very nice and am sure the process has been rewarding. Just curious on the approximate investment so far...pictures look priceless.
I will take one of the posters when you make them...the one with it on the lift. No Joke...pretty sure there is a solid market for that image on a poster.
I will take one of the posters when you make them...the one with it on the lift. No Joke...pretty sure there is a solid market for that image on a poster.