Brake rotors
#1
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I am thinking of doing a brake job on my 928 and I am confused are the Rotors the same ? Left or right as I seen some on E bait and they are the same part # Are there rotor manufactures that i should avoid?
#2
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Use Zimmerman or Sebro - rears are the same while fronts are handed - normally available as slotted or cross drilled.
__________________
![](https://cdn.shopify.com/s/files/1/1694/8685/files/928sRus_rennlist.png?v=1621798567)
Does it have the "Do It Yourself" manual transmission, or the superior "Fully Equipped by Porsche" Automatic Transmission?
George Layton March 2014
928 Owners are ".....a secret sect of quietly assured Porsche pragmatists who in near anonymity appreciate the prodigious, easy going prowess of the 928."![thumbsup](https://rennlist.com/forums/graemlins/bigok.gif)
![](https://cdn.shopify.com/s/files/1/1694/8685/files/928sRus_rennlist.png?v=1621798567)
Does it have the "Do It Yourself" manual transmission, or the superior "Fully Equipped by Porsche" Automatic Transmission?
![thumbsup](https://rennlist.com/forums/graemlins/bigok.gif)
928 Owners are ".....a secret sect of quietly assured Porsche pragmatists who in near anonymity appreciate the prodigious, easy going prowess of the 928."
![thumbsup](https://rennlist.com/forums/graemlins/bigok.gif)
#6
Race Car
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I prefer having all four slotted, matching is nice.
Not hard to find if you look, they've been good for a few Ks so far.
Mind the orientation post above.
Not hard to find if you look, they've been good for a few Ks so far.
Mind the orientation post above.
#7
Chronic Tool Dropper
Lifetime Rennlist
Member
Lifetime Rennlist
Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Mark and Roger both offer very good prices on known-good rotors. There are enough off-shore 'foundries' that cheap knock-offs are showing up on places like E-Bay. Best 'test' is to compare them with factory or Zimmerman for weight, true, and balance.
I replace rotors maybe every 100k on a car, and considering how much I depend on brakes, it's an area where I'm not a fan of skimping. I trust that the guy stopping behind me has similar consideration for his brakes too. So if that is or might ever be you or your family, please don't skimp.
I replace rotors maybe every 100k on a car, and considering how much I depend on brakes, it's an area where I'm not a fan of skimping. I trust that the guy stopping behind me has similar consideration for his brakes too. So if that is or might ever be you or your family, please don't skimp.
![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
Trending Topics
#8
Race Car
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
If your benchmark is 100K rotor replacement and that's your target for the "guy stopping behind you" ...so be it.
But separately, personal preference isn't always correlated with economy or "skimping."
I acknowledge your caveat: "Free advice and shared experience, with absolutely no relationship to your real-world conditions."
But separately, personal preference isn't always correlated with economy or "skimping."
I acknowledge your caveat: "Free advice and shared experience, with absolutely no relationship to your real-world conditions."
Last edited by SMTCapeCod; 10-15-2015 at 01:31 AM.