Chalkboss

I have an old cork gasket, and had leaks. Put a socket on them and most bolts were very loose. I snugged them up, realizing I need to do this job properly at some point. No more leaks,and it has been around 3000 miles. I got lucky so far... just don't go gorilla on them. The torque spec is very light, similar to trans pan bolts.

DeWolf

This would'nt be the crank thrust bearings, or the start of?

sstrickstein

I replaced my mounts and now onto the Trans mounts! Gotta be smooth at 110 plus