Adding a knock sensor
#16
Electron Wrangler
Lifetime Rennlist
Member
Lifetime Rennlist
Member
#18
Rennlist Member
You drill out the internal "Hex" that's used to install/remove the plug and then Tap it.
Then you need to grind the outer (round) plug into IIRC a 17mm so it can be reinstalled into the block.
Had a friend with a machine shop do it for me and it's installed in my 86.5 "onion" car, front most hole.
#20
Archive Gatekeeper
Rennlist Member
Rennlist Member
How many block plugs do you need, Jake? I should have 2 here somewhere from the motor that the Zombie ate...
#22
Archive Gatekeeper
Rennlist Member
Rennlist Member
PM me your shipping address and I'll try and find them tonight.
#24
Electron Wrangler
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Alan
#25
Archive Gatekeeper
Rennlist Member
Rennlist Member
Ooooh, already pimped fo' yo' ride....
Interesting- never noticed the manufacturer's stamp (ARCO) on these. Am seeing if I can Google this manufacturer:
Interesting- never noticed the manufacturer's stamp (ARCO) on these. Am seeing if I can Google this manufacturer:
#27
Archive Gatekeeper
Rennlist Member
Rennlist Member
That would be an epic waste of time and gas, will pop them in the mail in the AM.