kawi825

Nice job, i'm going to look at that resistor setup on the side wall looks great over there, and accessibly. I ended up drilling a small hole and bringing it in through the firewall but really can't figure out a good way to tag onto the CE panel. I wonder if anyone has done this in a decent way. i like having the spare ports like i do, and i threw a fuse in there, but the only way i could figure out putting power to the wire was putting a crimp tab on it and jamming it under the fuse holder blade, which is hacky as hell but it got me to the point where i could drvie around town a bit and hear the sweet new Borla/Hi flow Cat setup. Man it sounds good.

Alan

Why not use one of those spare fuse locations? You will need to get the fuse terminals - then you can probably connect from a spare open connector - say on the Z plug (or add a wire to another socket/plug with a spare slot) and wire it all on the back of the panel - like it was always there...

Alan