928 at last

Ok,
Whom had the correct gauge and colour coding for the engine bay harness available?
(To Roger and I, and others north of the border and elsewhere, that was not a misspelling of colour.....)
Looks like I'm doing a connector Re&Re in the very near future.....

Randy V

Someone do him a favour and tell him the colour.

Eplebnista

I thought you might be interested in reading this web page:
https://rennlist.com/forums/showthre...errerid=100405

From,
Eplebnista

928 at last

Yes, that was interesting...Thanks!
What I was looking for was a post IIRC by one of our members where they were doing up some engine harnesses and had sourced the correct gauge and colour to match what's there already.
I need to replace a section on the engine harness going to the 14 pin.

Dictys

look at my thread here for my 1990 S4

https://rennlist.com/forums/928-foru...arness-s4.html

whatudrivin

Rob, This might be the post you were referring to.

https://rennlist.com/forums/928-foru...uct-lines.html

928 at last

Thanks Brad,

That was one of them...!!

928 at last

And this was the other...!
PM coming shortly....

Speedtoys

Any reason you could not use a pair of 6pin weather pack connectors?

http://www.mcmaster.com/#weather-pac...ectors/=ngu7jo

928 at last

None that I could think of......I'm hoping to get away for the moment with just repairing the wires themselves, back a few inches (if that's feasible). My 14 pin connector looks to be in decent shape. It's the wires going into it that are the problem at the moment.

Speedtoys

My AC wire came off its nice new barrel, in my nice 2yr old connector....so Im considering changing to this type connector, if there's a few inches (max) of slack I can take advantage of to get back to nice fresh wire.