Yet another part ID thread
May 28, 2013 | 11:35 AM
Thread Starter
Joined: Jul 2007
Posts: 946
Likes: 5
From: Columbia, MO / San Luis Obispo, CA
Yet another part ID thread
In the picture below, what is the part labeled #1 and the part labeled #2?
1.jpg
I assume #1 is some kind of a vacuum damper for fuel pressure. Is #2 a regulator?
I looked in PET (for two hours), got frustrated, and decided to post.
May 28, 2013 | 11:54 AM
Joined: Dec 2002
Posts: 5,283
Likes: 52
From: Australia
2 is definitely a fuel pressure regulator (I think you will have 2, one on each rail). Not sure about No 1 - others with same model will no doubt advise.
May 28, 2013 | 12:33 PM
Joined: Oct 2010
Posts: 352
Likes: 2
From: Connecticut
#1 looks like one of the purge control valves for the evap emissions system
May 28, 2013 | 01:05 PM
Joined: Apr 2003
Posts: 9,601
Likes: 39
From: Abbotsford B.C.
#1 is for emissions. Iirc gas tank vapor
May 28, 2013 | 01:57 PM
Thread Starter
Joined: Jul 2007
Posts: 946
Likes: 5
From: Columbia, MO / San Luis Obispo, CA
Ok, after posting on RL I FINALLY saw it on PET.
May 28, 2013 | 02:01 PM
Joined: Sep 2002
Posts: 10,212
Likes: 465
That engine looks factory fresh!
May 28, 2013 | 04:09 PM
Thread Starter
Joined: Jul 2007
Posts: 946
Likes: 5
From: Columbia, MO / San Luis Obispo, CA
Quote:
Originally Posted by
PorKen
That engine looks factory fresh!
Too bad it is not a picture of my car…
By the way I love your products and am going to be in the market to buy your lift bars and the PK32V'r- probably in the fall.
May 29, 2013 | 01:57 AM
Joined: Oct 2006
Posts: 8,575
Likes: 5
From: Orange, Cal
You all forgot the fun part.
May 29, 2013 | 09:49 AM
Joined: Jul 2011
Posts: 1,762
Likes: 459
From: Millersville, MD
Wow. I couldn't find it for less than $713
Yet another part ID thread
