View Poll Results: Which weekend is best? You can vote for both if it does not matter.
Multiple Choice Poll. Voters: 19. You may not vote on this poll
Spring Fling 2013: April 19 - 21
#93
BUMP!
So I have made travel arrangements to be down for the spring fest.
I will be arriving at Corpus Christi at 4:58pm on friday and leaving on sunday at 11:40am.
I need a ride both ways.
Plus anybody wants to share a room?? OR should I make my own arrangements?
Thanks
So I have made travel arrangements to be down for the spring fest.
I will be arriving at Corpus Christi at 4:58pm on friday and leaving on sunday at 11:40am.
I need a ride both ways.
Plus anybody wants to share a room?? OR should I make my own arrangements?
Thanks
#94
BUMP!
So I have made travel arrangements to be down for the spring fest.
I will be arriving at Corpus Christi at 4:58pm on friday and leaving on sunday at 11:40am.
I need a ride both ways.
Plus anybody wants to share a room?? OR should I make my own arrangements?
Thanks
So I have made travel arrangements to be down for the spring fest.
I will be arriving at Corpus Christi at 4:58pm on friday and leaving on sunday at 11:40am.
I need a ride both ways.
Plus anybody wants to share a room?? OR should I make my own arrangements?
Thanks
Last edited by 77tony; 03-31-2013 at 09:51 PM.
#97
Booked my room...
Just reserved a bay side room. Looking forward to the drive down!!!
Here is a little web cam action of the pier right off of of the hotel. I can feel the gentle breezes, cool drinks and smell of un-burnt hydrocarbons dancing in my mind.....
Webcam ---->http://24.227.203.74/
Here is a little web cam action of the pier right off of of the hotel. I can feel the gentle breezes, cool drinks and smell of un-burnt hydrocarbons dancing in my mind.....
Webcam ---->http://24.227.203.74/
Last edited by ALKada; 04-08-2013 at 02:11 PM.
#98
Just reserved a bay side room. Looking forward to the drive down!!!
Here is a little web cam action of the pier right off of of the hotel. I can feel the gentle breezes, cool drinks and smell of un-burnt hydrocarbons dancing in my mind.....
Webcam ---->http://24.227.203.74/
Here is a little web cam action of the pier right off of of the hotel. I can feel the gentle breezes, cool drinks and smell of un-burnt hydrocarbons dancing in my mind.....
Webcam ---->http://24.227.203.74/
As to the cam, we are going to have to disable that thing Friday night. LOL
#100
Glad to hear your coming down Alex. Might want to check with Bilal (post # 90 above) not sure if he is still looking for a roomie ? T
#101
I've got next week off so I can start tearing in to my own car. With any luck I'll start this Saturday and I'm doing"
.5. Replace radiator
1. Torque tube/carrier bearings/converter and pump seals.
2. Re-set rear Koni's to medium
3. install new Koni's/springs front
3.5 Replace upper A-arms
4. New front tires (rears installed two weeks ago)
5. Center section of carpet replaced
6. Yank front of motor and check condition of gears due to using old on Racing belt. Reset timing.
7. Replace Brake bias valve with 33.
8. fix broken seat lumber motor on drivers side.
Yea, I got my work cut out for me.
Last edited by SeanR; 04-08-2013 at 08:27 PM.
#103
Tony, if no one steps up I'll take them off your hands. I have a feeling that they will sit in the warehouse for a decade but you won't have them any longer. Looking forward to spending some time on the new range. Thanks for that.
#104
Ahhh, that could be fun.
I've got next week off so I can start tearing in to my own car. With any luck I'll start this Saturday and I'm doing"
1. Torque tube/carrier bearings/converter and pump seals.
2. Re-set rear Koni's to medium
3. install new Koni's/springs front
3.5 Replace upper A-arms
4. New front tires (rears installed two weeks ago)
5. Center section of carpet replaced
6. Yank front of motor and check condition of gears due to using old on Racing belt. Reset timing.
7. Replace Brake bias valve with 33.
8. fix broken seat lumber motor on drivers side.
Yea, I got my work cut out for me.
I've got next week off so I can start tearing in to my own car. With any luck I'll start this Saturday and I'm doing"
1. Torque tube/carrier bearings/converter and pump seals.
2. Re-set rear Koni's to medium
3. install new Koni's/springs front
3.5 Replace upper A-arms
4. New front tires (rears installed two weeks ago)
5. Center section of carpet replaced
6. Yank front of motor and check condition of gears due to using old on Racing belt. Reset timing.
7. Replace Brake bias valve with 33.
8. fix broken seat lumber motor on drivers side.
Yea, I got my work cut out for me.