S4 MAF ID measurement?
#16
Archive Gatekeeper
Rennlist Member
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Sure, tonight. Which convention for measuring screen material? Do you want the measurement in Tyler mesh, mill grade, or market grade?
#19
Archive Gatekeeper
Rennlist Member
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
![](https://webfiles.uci.edu/redwards/public/Dummy%20MAF%20JB%20welded%204-7-12.jpg)
#22
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Stock grid mesh is made of 0.3mm dia stainless wire, the "airholes" are 1.35mm square.
This gives a useful "air" area about 67% of the total area...
If you measure a new screen, it is much nearer 1.0mm thickness...
Do not try to get inside the black lid, there's nothing good to see in there, and lots of harm to be done...
This gives a useful "air" area about 67% of the total area...
If you measure a new screen, it is much nearer 1.0mm thickness...
Do not try to get inside the black lid, there's nothing good to see in there, and lots of harm to be done...