Notices
928 Forum 1978-1995
Sponsored by:
Sponsored by: 928 Specialists

Help with HVAC

Thread Tools
 
Search this Thread
 
Old Jul 9, 2012 | 03:22 AM
  #1  
Rod Handsfield's Avatar
Rod Handsfield
Thread Starter
Racer
 
Joined: Oct 2007
Posts: 337
Likes: 6
Default Help with HVAC

Can someone post a picture of the heater valve and how to wire it closed?
Reply
Old Jul 9, 2012 | 03:26 AM
  #2  
SQLGuy's Avatar
SQLGuy
Three Wheelin'
 
Joined: Mar 2010
Posts: 1,307
Likes: 3
From: Colorado Springs, CO USA
Default

There's a picture of it at the top of this page: http://members.rennlist.com/pirtle/svc_heatv.html

To wire it closed, wrap wire so that the black link is pulled all the way back into the vacuum diaphragm.
Reply
Old Jul 9, 2012 | 02:34 PM
  #3  
Bill Ball's Avatar
Bill Ball
Under the Lift
Lifetime Rennlist
Member
20 Year Member
 
Joined: Mar 2002
Posts: 18,648
Likes: 52
From: Buckeye, AZ
Default

Extra tip - unsnap the valve arm from the vaccum pod arm. Then it is free to close easily and you don't have to wire it against the resistance of the pod.
Reply
Old Jul 9, 2012 | 03:13 PM
  #4  
Speedtoys's Avatar
Speedtoys
Addict
Rennlist Member
15 Year Member
 
Joined: Sep 2010
Posts: 13,583
Likes: 1,044
From: Boulder Creek, CA
Default

If you're already there, why not just replace it so it's no longer open for lack of a working pod?
Reply




All times are GMT -3. The time now is 04:24 AM.