Poorly documented fastener/zip-tie/clamp part numbers
#31
Drifting
Threads like this make my inner OCD geek out.
#32
Addict
Rennlist Member
Rennlist Member
Join Date: Oct 2003
Location: Gone. On the Open Road
Posts: 16,432
Received 1,603 Likes
on
1,047 Posts
#33
Archive Gatekeeper
Rennlist Member
Rennlist Member
Thread Starter
Mine were originally yellow too, but c'mon man,
#34
Addict
Rennlist Member
Rennlist Member
Join Date: Oct 2003
Location: Gone. On the Open Road
Posts: 16,432
Received 1,603 Likes
on
1,047 Posts
#35
Rennlist Member
MY1994 on my car were originally black as per 321 971 847 B, but I kindly like the look of the yellow ones actually better in the engine bay (and glitches do occur in the matrix....)
#36
Drifting
If I recall, Ray Shaffer stated at Rendezvous 928 that any Classic parts still in production are produced to keep the car on the road and reliable, not necessarily to keep it in Concours-spec condition. That statement feels relevant here (and a bit frustrating for a self-proclaimed preservationist like myself).
#37
Rennlist Member
Apologies, Bruce, poor attempt at Omega clamp humor. It's interesting, on the pic in post #1, 321971847A is the yellow one, and 321971847B is the black one, same size. I only remember seeing yellow ones for the GTS breather crossover hose, but of course the black must have been used as well.
Adding to the list of poorly documented clamps would be the little spacer clamps that are on the PSD hoses. They're not shown in the PET...
#38
Rennlist Member
Yeah, some judges are tougher than others. Sean Ratts is super tough! Last week at 3rd Coast he busted out his torque wrench and checked fasteners to see if they were in range. Was like a cold war nuclear surety inspection Okay, not really...
#39
Nordschleife Master
'Cuz then the owner would blame him, and expect it to be fixed for free.
The following users liked this post:
Mrmerlin (09-18-2023)
#40
Archive Gatekeeper
Rennlist Member
Rennlist Member
Thread Starter
I would have been dismissed from the competition at that point.
#41
Inventor
Rennlist Member
Rennlist Member
3.6mm and 4.8mm (0.14" and 0.19") Ty-Raps! (Local GrayBar $72! )
11.6" (= 3" dia) will hold the main wire harness behind the AC box and wires/hoses to the intake manifold legs.
https://www.graybar.com/store/en/gb/...er:3.00%20in.}
https://www.graybar.com/store/en/gb/...er:1.13%20in.}
I plan on starting a reference thread with all the factory locations and sizes pictured.
So far, all the 'raps around the '80 are 4.8mm except for one 3.6mm at the AC vacuum relays holding the hose bundle.
11.6" (= 3" dia) will hold the main wire harness behind the AC box and wires/hoses to the intake manifold legs.
https://www.graybar.com/store/en/gb/...er:3.00%20in.}
https://www.graybar.com/store/en/gb/...er:1.13%20in.}
I plan on starting a reference thread with all the factory locations and sizes pictured.
So far, all the 'raps around the '80 are 4.8mm except for one 3.6mm at the AC vacuum relays holding the hose bundle.
#43
Rennlist Member
@Rob Edwards any chance you have that original picture still?
I created a spread sheet with P-clamps,harness clips that could be useful
https://docs.google.com/spreadsheets...it?usp=sharing
I created a spread sheet with P-clamps,harness clips that could be useful
https://docs.google.com/spreadsheets...it?usp=sharing
Last edited by Michael Benno; 07-04-2024 at 09:06 PM.
The following users liked this post:
islaTurbine (07-04-2024)
#44
Archive Gatekeeper
Rennlist Member
Rennlist Member
Thread Starter
Yes, I think these are the pics:
The following 5 users liked this post by Rob Edwards:
Damocles03 (07-06-2024),
Darklands (07-06-2024),
islaTurbine (07-04-2024),
Kiln_Red (07-05-2024),
Michael Benno (07-05-2024)
#45
Rennlist Member
By any chance does anyone know the part number for this retainer for the ABS harness?