WTB straight vacuum line couplers
#1
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Thread Starter
WTB straight vacuum line couplers
On the throttle body '87 and up there are two straight vacuum line couplers. In the pic below one is shown. Where do I get new ones? I only have replacements for the elbows.
#2
Three Wheelin'
Join Date: Feb 2009
Location: Washington "Dc"
Posts: 1,810
Likes: 0
Received 0 Likes
on
0 Posts
Cant you make them from very small vacuum hose? Looks like that to me. [although your TB looks so clean you probably want to use genuine porsche parts] I think the size is 3 or 3.5 mm.
#3
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
In PET it does not show a straight connector but shows a 90 instead. I use a 90 and cut it in half (close to straight as it flexs) and it does the job fine.
__________________
Does it have the "Do It Yourself" manual transmission, or the superior "Fully Equipped by Porsche" Automatic Transmission? George Layton March 2014
928 Owners are ".....a secret sect of quietly assured Porsche pragmatists who in near anonymity appreciate the prodigious, easy going prowess of the 928."
Does it have the "Do It Yourself" manual transmission, or the superior "Fully Equipped by Porsche" Automatic Transmission? George Layton March 2014
928 Owners are ".....a secret sect of quietly assured Porsche pragmatists who in near anonymity appreciate the prodigious, easy going prowess of the 928."
#4
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Thread Starter
Good idea, thanks.
This is even easier, thanks. I seem to have checked in my common sense sometime ago and forgot to check it out again.
This is even easier, thanks. I seem to have checked in my common sense sometime ago and forgot to check it out again.
#5
Drifting
Correct, the straight coupler is not shown on the 928 PET, however it is shown on the 964 PET....
as Porsche part # 928.574.747.03, nomenclature: connecting piece
as Porsche part # 928.574.747.03, nomenclature: connecting piece