Early HVAC vacuum diagrams & central locking
#1
Rennlist Member
Thread Starter
Early HVAC vacuum diagrams & central locking
I had an interesting time troubleshooting an existing system, which was set up completely wrong.
I used a Porsche service information book from 1978, found it to be good but inaccurate or lacking info.
I've modified the page for further clarification. When I have more time, I'll post up more info on troubleshooting.
To download PDF, click here.
I'll post up the central locking as an append, but no changes were required. Useful info none-the-less.
I used a Porsche service information book from 1978, found it to be good but inaccurate or lacking info.
I've modified the page for further clarification. When I have more time, I'll post up more info on troubleshooting.
To download PDF, click here.
I'll post up the central locking as an append, but no changes were required. Useful info none-the-less.
#2
Rennlist Member
Thanks Jim.
I am pretty sure all my vacuum flaps are not working properly and thus impacting my AC operation.
I am pretty sure all my vacuum flaps are not working properly and thus impacting my AC operation.
Last edited by jwillman; 05-27-2012 at 02:27 PM.
#3
Rennlist Member
Thread Starter
#4
Rennlist Member
#5
Rennlist Member
Thanks Jim. I will d/l the PDF when I get home.
I found (1) of my vacuum diaphragm valves blown apart (one above the CE)....the plastic failed, but the rubber inside was good. I reassembled, coating the rubber bellows with WD and epoxied it, clamping together for a few days. Worked like a champ on the vacuum tester....Won't know real world until I start putting her back together...
I found (1) of my vacuum diaphragm valves blown apart (one above the CE)....the plastic failed, but the rubber inside was good. I reassembled, coating the rubber bellows with WD and epoxied it, clamping together for a few days. Worked like a champ on the vacuum tester....Won't know real world until I start putting her back together...
#6
Rennlist Member
how did I miss this thread? Thnx Jim, subscribed.