Parting a '91 GT
#31
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Rear hatch seal?
#35
Three Wheelin'
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I would be interested in the shift **** and boot, don't care about the color, just as long as it can be recovered and installed fine. It's the correct "GTS" style I'm assuming? Hard to see on my phone.
Also, I'm in need of the passenger mirror glass. I don't need the housing, but if that's easier and not much more expensive so be it. Lastly, the drivers outside door handle assembly. Mine is on its last legs.
Also, I'm in need of the passenger mirror glass. I don't need the housing, but if that's easier and not much more expensive so be it. Lastly, the drivers outside door handle assembly. Mine is on its last legs.
#36
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I would be interested in the block to oil cooler hoses and the oil cooler under the rad?
__________________
![](https://cdn.shopify.com/s/files/1/1694/8685/files/928sRus_rennlist.png?v=1621798567)
Does it have the "Do It Yourself" manual transmission, or the superior "Fully Equipped by Porsche" Automatic Transmission?
George Layton March 2014
928 Owners are ".....a secret sect of quietly assured Porsche pragmatists who in near anonymity appreciate the prodigious, easy going prowess of the 928."![thumbsup](https://rennlist.com/forums/graemlins/bigok.gif)
![](https://cdn.shopify.com/s/files/1/1694/8685/files/928sRus_rennlist.png?v=1621798567)
Does it have the "Do It Yourself" manual transmission, or the superior "Fully Equipped by Porsche" Automatic Transmission?
![thumbsup](https://rennlist.com/forums/graemlins/bigok.gif)
928 Owners are ".....a secret sect of quietly assured Porsche pragmatists who in near anonymity appreciate the prodigious, easy going prowess of the 928."
![thumbsup](https://rennlist.com/forums/graemlins/bigok.gif)
#37
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Seriously, I had two sport seats shipped halfway across the country for about $200. They were packed in thick walled boxes lowered over a wooden base to which the seats were mounted. They arrived without a scratch. If packed properly, it can be done safely and relatively inexpensive. Scariest part was picking them up at the bus station.
![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
#38
Rennlist Member
Thread Starter
#40
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
The visors are black vinyl and are OK I believe. If I can locate the second one, I'll take pictures and post.
#41
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Ya..im pretty sure that _tail light_ plugs are sufficiently not self aware, like other relay or component related electronics, to care how much water they had in them for a short time.
Im not asking for anythings that makes decisions, or with moving parts.
12v in, makes light, goes to ground.
Im not asking for anythings that makes decisions, or with moving parts.
12v in, makes light, goes to ground.
#44
Drifting
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Hey Gary,
I need one of the harness connectors (just the plastic part) that connects to the pod as one of my clicps broke and it dose not stay firmly connected.
If you cut 2 or 3 off and throw them in a CD mail pack ILL give ya $20
But I could also use the cluster as well because some of the plastic has worped.
would you be willing to send the cluster and connectors for a price?
maybe the face is less scratched then mine as well. $100 for it all.
Brad
I need one of the harness connectors (just the plastic part) that connects to the pod as one of my clicps broke and it dose not stay firmly connected.
If you cut 2 or 3 off and throw them in a CD mail pack ILL give ya $20
But I could also use the cluster as well because some of the plastic has worped.
would you be willing to send the cluster and connectors for a price?
maybe the face is less scratched then mine as well. $100 for it all.
Brad
#45
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Hey Gary,
I need one of the harness connectors (just the plastic part) that connects to the pod as one of my clicps broke and it dose not stay firmly connected.
If you cut 2 or 3 off and throw them in a CD mail pack ILL give ya $20
But I could also use the cluster as well because some of the plastic has worped.
would you be willing to send the cluster and connectors for a price?
maybe the face is less scratched then mine as well. $100 for it all.
Brad
I need one of the harness connectors (just the plastic part) that connects to the pod as one of my clicps broke and it dose not stay firmly connected.
If you cut 2 or 3 off and throw them in a CD mail pack ILL give ya $20
But I could also use the cluster as well because some of the plastic has worped.
would you be willing to send the cluster and connectors for a price?
maybe the face is less scratched then mine as well. $100 for it all.
Brad
Here are two pictures of the cluster (I took them last night without cleaning the cluster up first). It looks to be in reasonable shape except for a spot under the battery gauge where it looks like a small spot has peeled (and the gas gauge needle is off). The connectors and the cluster are yours if you want them.
![](http://i258.photobucket.com/albums/hh265/gwgjr33/928%20heads/cluster2.jpg)
![](http://i258.photobucket.com/albums/hh265/gwgjr33/928%20heads/cluster.jpg)