928 Featured in Engine Build Magazine
Thread Starter
Racer
Joined: Nov 2011
Posts: 309
Likes: 33
From: St. Augustine, Florida
928 Featured in Engine Build Magazine
Hope this isn't a re-post. The December, 2011 Engine Builder magazine has a great article by Carl Fausett on "Designing and Building a World-Record Beating Porsche V8".
http://www.enginebuildermag.com/Arti...orsche_v8.aspx
http://www.enginebuildermag.com/Arti...orsche_v8.aspx
Addict
Rennlist Member
Rennlist Member
Joined: Sep 2010
Posts: 13,583
Likes: 1,046
From: Boulder Creek, CA
Hope this isn't a re-post. The December, 2011 Engine Builder magazine has a great article by Carl Fausett on "Designing and Building a World-Record Beating Porsche V8".
http://www.enginebuildermag.com/Arti...orsche_v8.aspx
http://www.enginebuildermag.com/Arti...orsche_v8.aspx
Pretty porsche cam gears there too.
Trending Topics
Rennlist Stories
The Best Porsche Posts for Porsche Enthusiasts
Every Era of 911 Owner Explained in One Sentence
Verdad Gallardo
Thinking of Buying a Porsche? Do These 10 Things First
Joe Kucinski
Pixar Pals Turned Into 1-of-1 Porsches!
Michael S. Palmer
Theon Goes Full Carbon Fiber With Stunning New Build
Verdad Gallardo
Genius Porsche-Themed Gifts That'll Make Any Dad or Grad Smile
Joe Kucinski
10 Used Porsches Are Selling for Way Too Cheap
Joe Kucinski
Tuner Is Converting Porsche 911s Into Shooting Brakes
Verdad Gallardo
This Coachbuilt Creation Is A Modern Take on the Legendary Porsche 917
Verdad Gallardo
Is This Convertible Cayenne A Steal, Or A Returnless Investment?
Verdad Gallardo
Developer
Joined: Dec 2001
Posts: 7,005
Likes: 64
From: Horicon, WI
Thanks, guys! I appreciate it.
BTW: that photo taken in 2010 at the time we were featuring our 32v intake manifold study and nylon intake runner development. Our new cam sprockets did not exist at the time that photo was taken.
Here is the thread about that intake manifold study, in case you missed it:
https://rennlist.com/forums/928-foru...32v-928-a.html
BTW: that photo taken in 2010 at the time we were featuring our 32v intake manifold study and nylon intake runner development. Our new cam sprockets did not exist at the time that photo was taken.
Here is the thread about that intake manifold study, in case you missed it:
https://rennlist.com/forums/928-foru...32v-928-a.html
Drifting
Joined: Jan 2010
Posts: 3,334
Likes: 8
From: Nebraska
I picked up a small engine I had rebuilt this week and my engine guy gave me the mag. He knew I liked Porsche's. He also reworked a valve for the 928 last year so he enjoyed reading it. Great article.
