80-86 rear "S" Spoiler with wiper delete ?
08-25-2014 | 08:16 PM
#61
Drifting
Joined: Dec 2012
Posts: 2,453
Likes: 6
From: Pennsyltucky
The inner radius is tighter in the filled area.(post #53 pic 2)
pic 3 you can see the area is wrong also.
Wouldn't Brad be able to tell by the VIN and other indicators whether this car came equipped w rear wiper?
Last edited by The Fixer; 08-25-2014 at 08:55 PM.
08-25-2014 | 08:30 PM
#62
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Joined: Jan 2003
Posts: 16,843
Likes: 900
From: Double Oak, TX
Original number was 928 512 071 00.
Nice find Brad.
Nice find Brad.
__________________
Does it have the "Do It Yourself" manual transmission, or the superior "Fully Equipped by Porsche" Automatic Transmission?
George Layton March 2014
928 Owners are ".....a secret sect of quietly assured Porsche pragmatists who in near anonymity appreciate the prodigious, easy going prowess of the 928."
Does it have the "Do It Yourself" manual transmission, or the superior "Fully Equipped by Porsche" Automatic Transmission?
George Layton March 2014928 Owners are ".....a secret sect of quietly assured Porsche pragmatists who in near anonymity appreciate the prodigious, easy going prowess of the 928."
08-25-2014 | 11:46 PM
#63
Burning Brakes
Joined: Jan 2005
Posts: 881
Likes: 1
From: Texas
Oh good lord!!!
I have been practicing on filling the rear spoiler. This was the first attempt. Lots of R&D has been done and I think the 2nd one will be perfect.
This was a first attempt and it looks ok but yes you can see the outline of the fill in spot. I ordered another batch of material and will try the second one this weekend. Pretty sure I can get it flawless with no seam.
I have been practicing on filling the rear spoiler. This was the first attempt. Lots of R&D has been done and I think the 2nd one will be perfect.
This was a first attempt and it looks ok but yes you can see the outline of the fill in spot. I ordered another batch of material and will try the second one this weekend. Pretty sure I can get it flawless with no seam.
08-26-2014 | 12:18 AM
#65
Nordschleife Master
Joined: Aug 2005
Posts: 8,004
Likes: 20
From: So Cal
Nice job Brad. +1 on the recipe share if comfortable doing so.
I am constantly amazed by the keen eyes of some on here. I kept looking and zooming and am only somewhat convinced I can see any traces of your mod.
I am constantly amazed by the keen eyes of some on here. I kept looking and zooming and am only somewhat convinced I can see any traces of your mod.
08-26-2014 | 01:27 PM
#66
Burning Brakes
Joined: Jan 2005
Posts: 881
Likes: 1
From: Texas
I have no intention of selling these and after it looks right I will share the process I used. I can tell you that it is about $75 in material to fill in the hole. I used three different rubber compunds till I found the one that best fits the Shore Hardness. I will try and have it complete by our next group meeting and get their buy in.
Brad
Brad
