SOS NEED OUTPUT SHAFT SEALS
09-10-2011, 08:10 PM
#1
Instructor
Thread Starter
Join Date: Dec 2007
Location: San Jose, ca.
Posts: 136
Likes: 0
Received 0 Likes
on
0 Posts
SOS NEED OUTPUT SHAFT SEALS
Im in the San Jose Bay Area and need early model 5 speed output shaft seals(case#928.301.101.4r)
I got the wrong ones from 928 International !
I really want to get my Shark back on the road this weekend !!
Thanks, Jeff McCabe
Phone # 408-265-4745
I got the wrong ones from 928 International !
I really want to get my Shark back on the road this weekend !!
Thanks, Jeff McCabe
Phone # 408-265-4745
Last edited by jmccabe; 09-10-2011 at 08:17 PM. Reason: added phone #
09-10-2011, 08:21 PM
#2
Instructor
Thread Starter
Join Date: Dec 2007
Location: San Jose, ca.
Posts: 136
Likes: 0
Received 0 Likes
on
0 Posts
09-10-2011, 09:30 PM
#3
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Jeff,
Which seal are you looking for 928 302 283 00 or 928 302 167 03??
Roger
Which seal are you looking for 928 302 283 00 or 928 302 167 03??
Roger
__________________
Does it have the "Do It Yourself" manual transmission, or the superior "Fully Equipped by Porsche" Automatic Transmission?
George Layton March 2014
928 Owners are ".....a secret sect of quietly assured Porsche pragmatists who in near anonymity appreciate the prodigious, easy going prowess of the 928."
Does it have the "Do It Yourself" manual transmission, or the superior "Fully Equipped by Porsche" Automatic Transmission?
George Layton March 2014928 Owners are ".....a secret sect of quietly assured Porsche pragmatists who in near anonymity appreciate the prodigious, easy going prowess of the 928."
09-10-2011, 10:19 PM
#4
Instructor
Thread Starter
Join Date: Dec 2007
Location: San Jose, ca.
Posts: 136
Likes: 0
Received 0 Likes
on
0 Posts
The early ones are smaller O.D
I didnt damage the first one I removed and was able to straighten it. It still seals good. I am going to use the old ones and just order new ones and swap them out if the old ones leak.
Jeff
