Exhaust sealing ring orientation
#1
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I am installing my headers now in my engine assembly. Do the sealing rings go flat side to the cylinder head or the round side to the cylinder head. WSM no help nor the picture in PET.
Flat side looks like the side that crushes. I am figuring against the cylinder head.
Thanks,
Jeff
Flat side looks like the side that crushes. I am figuring against the cylinder head.
Thanks,
Jeff
#3
Archive Gatekeeper
Rennlist Member
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Flat/flanged side of sealing rings against the manifolds (easier to pry out later…)
You can hold them in with a small dollop of copper antiseize, or you could just rotate the engine stand while mounting, so they don't fall out...
You can hold them in with a small dollop of copper antiseize, or you could just rotate the engine stand while mounting, so they don't fall out...
#4
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Okay. Made them face the manifold. I already have them held in there with copper anti seize (great minds think alike). Can't rotate my stand as I have side mounts to make it more stable.